Advance Tapes AT544 Conductive Tin Clad Copper Tape, 12mm x 33m

Technical Reference
Legislation and Compliance
Non Compliant
COO (Country of Origin): IE
Product Details

AT544 35μ Tin Clad Copper Foil Masking Tape

A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal

Conductive acrylic adhesive
Good high and low temperature resistance
Easy unwind


Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S


Conforms to Flame Retardant requirement part only of UL510

EMI/RFI Shielding Tapes

When using these tapes galvanic compatibility should be taken into account.

Attribute Value
Total Thickness 0.06mm
Foil Thickness 0.035mm
Width 12mm
Length 33m
Conductivity Conductive
Adhesion Strength 5 N/cm
Adhesive Material Acrylic
Material Plating Tin
Tensile Strength 40N/cm
Maximum Temperature Resistance +155°C
Complies with EN Legislation BS EN 60454 - Part 2
Minimum Temperature Resistance -20°C
Model Number AT544
23 In stock for FREE next working day delivery
Price 1 Reel of 33 Metre(s)
£ 85.80
(exc. VAT)
£ 102.96
(inc. VAT)
Per Reel
Per Metre*
1 +
*price indicative
Related Products
3M 1181 Tapes consists of a soft copper ...
3M 1181 Tapes consists of a soft copper foil backing and a unique electrically conductive pressure-sensitive acrylic adhesive. Smooth copper tapes, coated on one side with conductive acrylic adhesive Designed for electromagnetic or radio-electrical shielding applications Highly resistant to solvents, UV rays, humidity and mould Suitable for soldering.
The Advance Tapes copper tape is a 35μ, ...
The Advance Tapes copper tape is a 35μ, coated with a non-conductive acrylic adhesive, supplied on a removable silicon liner. This tape is 0.07mm thick, 10mm wide and 33m long.Note:To prevent tarnishing, do not touch this tape with bare hands.EMI/RFI shielding tapes:When using this tape, galvanic compatibility should be taken ...
This 938A Embossed Copper Foil Tape from Hi-Bond ...
This 938A Embossed Copper Foil Tape from Hi-Bond features a conductive acrylic adhesive with a uniform dispersion of conductive particles. The embossed copper foil carrier is heat and cold resistant. Shielding or repair of signal cable Blinding the end of knitted wire mesh of shielding cable Shield leaking or invading ...
The copper foil shielding tape 1194, has a ...
The copper foil shielding tape 1194, has a 1.4-mil smooth copper foil backing and a non-conductive acrylic pressure sensitive adhesive and liner. This makes them ideal for applications where a tape which does not drain the static charge to a grounded substrate is required. Deadsoft 1-ounce copper foil backing Nonconductive ...