TE Connectivity 2 Way Wire Seal for MATE-N-LOK Connectors

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

TE Connectivity’s (TE) Universal MATE-N-LOK wire seal installs into the Universal MATE-N-LOK connector housings and accommodates Universal MATE-N-LOK contacts (socket and plug). When properly assembled, the wire seal provides water ingress protection into the connector housings at the wire entry locations. The socket and plug contacts are crimped to 18 - 10 AWG wire conductors with outside insulation diameters ranging from a 2.03 to 4.07mm. The wire seals are purchased separately and primarily used in wire-to-wire applications. An accessory interface seal provides ingress protection at the mating connectors’ interface.

Provides ingress protection from water when installed into the connector housing
Accommodates a wire range from 18-10AWG
Upgrades the Universal MATE-N-LOK connectors to a waterproof system
Applications
Outdoor LED Lighting
Appliances
HVAC
Fire & Security
Power Supplies

Specifications
Attribute Value
Type Wire Seal
Connector Type MATE-N-LOK
Number of Contacts 2
Material Silicone Rubber
Colour Grey
Available to back order for despatch 18/10/2019
Price Each (In a Bag of 500)
£ 0.196
(exc. VAT)
£ 0.235
(inc. VAT)
Units
Per unit
Per Bag*
500 - 500
£0.196
£98.00
1000 - 1500
£0.162
£81.00
2000 +
£0.157
£78.50
*price indicative
Related Products
A range of accessories for the Econoseal J ...
Description:
A range of accessories for the Econoseal J Mark II (+) series automotive wire connectors. All connectors are designed to be used with thin walled non-irradiated PVC cablesThough designed initially for automotive applications, Econoseal III can be used in any industry where a reliable sealed connector is needed.
A range of accessories including bushings, crimp tools ...
Description:
A range of accessories including bushings, crimp tools and lockwashers for use with BNC RF coaxial connectors. Please see additional data table for details.
Contacts for standard density connectors (1.6mm diameter) and ...
Description:
Contacts for standard density connectors (1.6mm diameter) and high density connectors (1.0mm diameter).Blanking pins are available for filling unused 1.6mm cavities.Use Crimp Tool stock no. 194-2264 for 1.0 and 1.6mm contacts.,Alternatively use Universal Crimp Tool Frame stock no. 848-391 with Die Set stock no. 158-8955 (for 1.6mm contacts only).
The panel mount dimensions are such that mounting ...
Description:
The panel mount dimensions are such that mounting interchangeability is possible with MIL-C-5015 connector sizes (see Compatibility table). The plugs may be front or rear mounted, with a maximum of 4mm panel thickness. Contacts are rear insert, and are held in place by the shells locking retention plate, they are ...