FlexLink Beam Multi-Block, strut profile 22 mm, 44 mm, Groove Size 5.5mm

  • RS Stock No. 308-0295
  • Mfr. Part No. XDAM 2
  • Brand FlexLink
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Multi-Block

Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting the sheet material.,Screw length to be sheet thickness +22mm.,XC type also includes a push on clamp for an alternative method of holding the sheet material (suitable for sheet thickness 1 to 6mm).

Specifications
Attribute Value
Structural Element Type Beam
Connector Type Multi-Block
Fits Groove Size 5.5mm
Thread Size M5
Fits Strut Profile 22 mm, 44 mm
Product Family FlexLink
Material Polyamide
Product System XD
30 In stock - FREE next working day delivery available
Price Each
£ 1.85
(exc. VAT)
£ 2.22
(inc. VAT)
Units
Per unit
1 - 4
£1.85
5 - 9
£1.77
10 +
£1.74
Related Products
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ball end Allen key.,Beams may be connected end to end, ...
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. 483-9650Qty 2 M6 slot nuts see stock no. 248-9843. Polyamide ...
Enables enclosure beam ends to be connected to ...
Description:
Enables enclosure beam ends to be connected to beam sides. XD to XD, XD to XC and XF to XF,The connector is mounted directly onto the beam end with the M5 self-tapping screw.,When the connector is being fitted to the beam face, the T fastener will automatically turn into position ...
For building stable and neat framework corners.The beams ...
Description:
For building stable and neat framework corners.The beams must be cut accurately (45° for a 90°corner, and 22.5° for a 45° corner).Corner fittings can be placed into the T-slots and clamped against the slot with the set screws provided. Corner Fittings XD and XC, 45° and 90°.