MG Chemicals Silver Conductive Adhesive Epoxy, 15 g Syringe

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

MG Chemical 8331 Slow Cure Conductive Epoxy Adhesive

The two-part MG Chemicals 8331S is an economical, slow cure silver conductive epoxy adhesive designed to give good electrical and thermal conductivities. The conductive adhesive provides excellent EMI/RFI shielding.

Features and Benefits

Easy 1: 1 mix ratio
Resists thermal and mechanical shocks
Provides the low resistivity needed for many operating conditions
Adheres to most electronic substrates
Strong water and chemical resistance
Effective at filling in seems between your metal plates.
To cure the adhesive faster, you can use higher temperatures up to 150°C

Typical Application

The primary applications for the 8331 are repair and assembly of your electronics in microelectronics and optoelectronics. It is used in the automobile, aerospace, marine communication, instrumentation, and industrial control equipment industries.
Bond electronic devices, repair defective traces and create jumpers on circuit boards

Note

Silver conductive epoxy cannot be soldered to. Doing so causes the product to melt.

Specifications
Attribute Value
Product Type Epoxy
Conductive Element Silver
Package Type Syringe
Package Size 15 g
Cure Time 50 min
Maximum Operating Temperature +150°C
Operating Temperature Range -40 → +150 °C
Chemical Composition Epoxy Resin
Minimum Operating Temperature -40°C
8 In stock for FREE next working day delivery
Price Each
£ 59.69
(exc. VAT)
£ 71.63
(inc. VAT)
Units
Per unit
1 +
£59.69
Related Products
Can be used to create a thin, smooth, ...
Description:
Can be used to create a thin, smooth, flexible and adherent film which has a high electrical conductivity. For use in repairing electrical circuits on PCB track or heated rear windscreens, screening plastic housings against high frequency fields, earthing strips, connections to non-solderable surfaces, contact surfaces, potentiometer tracks. Excellent adhesion ...
Single component system High electrical conductivity Fast drying ...
Description:
Single component system High electrical conductivity Fast drying Highly adherent to circuit boards Operating temperature to 400°F (205°C)APPLICATIONS Circuit trace repair Solderless linking of components EMI shielding Solderable terminations Quick prototype modifications.
Micro-tip pen for drawing conductive traces on flexible ...
Description:
Micro-tip pen for drawing conductive traces on flexible and ITO surfaces. Quickly creates flexible conductive silver traces on flex circuitry Micro tip for precise applications Dries in minutes at room temperature Highly adherent silver-based polymer system Repairs conductive traces on flexible circuits and indium tin oxide components.
TPM550 features high thermal conductivity of 5.5 W/m.K ...
Description:
TPM550 features high thermal conductivity of 5.5 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of defined interfaces. TPM550 can be reworked and its lower specific ...