FTDI Chip USB to RS232 (Dual) Adapter Board - USB-COM232-Plus2

  • RS Stock No. 687-7749
  • Mfr. Part No. USB-COM232-Plus2
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

FTDI Chip Adapter Board

The FTDI Chip adapter board provides a simple method of adapting two legacy RS232 serial devices to a modern USB port. This is accomplished by incorporating the industry standard USB2.0 hi-speed serial bridge chip. This module uses a standard USB-miniB device connector for connecting to an upstream host or hub port. This module requires USB device drivers, which is used to make the module appear as two Virtual COM Port (VCP). This allows existing serial communications software, such as HyperTerminal to exchange data through the module to a legacy RS232 peripheral device.

Features and Benefits

Easy plug and play installation and RS-232 device connection
Industry Standard FTDI chip set and device drivers for maximum compatibility
Powered by USB port, no external power adapter required
Serial port speed up to 1Mbps
LEDs indicate USB enumeration, RxD and TxD for monitoring port status and easy diagnostics
Operating temperature ranges between -40°C and 85°C
Two DE-9P male connectors
Data rate is 1Mbps

Applications

Embedded systems
Communication

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
CE
FCC certified

Specifications
Attribute Value
Kit Classification Development Kit
154 In stock - FREE next working day delivery available
Price Each
£ 30.23
(exc. VAT)
£ 36.28
(inc. VAT)
Units
Per unit
1 - 4
£30.23
5 - 9
£28.73
10 - 19
£27.31
20 - 49
£25.93
50 +
£24.65
Related Products
The FTDI Chip USB Module is an MCU ...
Description:
The FTDI Chip USB Module is an MCU to embedded USB host controller development kit for the VNC1L IC device. It is supplied on a PCB, designed to fit into a 24-pin DIP socket and provides access to the UART, parallel FIFO and SPI interface pins on the device via ...
The FUSB307B targets system designers looking to implement ...
Description:
The FUSB307B targets system designers looking to implement up to four USB Type-C port controllers (TCPC) with USB-PD capabilities. This solution provides integrated Type-C Rev 1.3 detection circuitry enabling manual attach/detach detection. Time critical Power Delivery functionality is handled autonomously, offloading the μProcessor or Type-C Port Manager (TCPM). USB-PD Interface ...
USB PD 3.0 compliant Universal input mains voltage ...
Description:
USB PD 3.0 compliant Universal input mains voltage range: from 90 VAC to 264 VAC (frequency from 45 Hz to 65 Hz)Three fixed PDOs available: 5 V, 9 V, 15 V – 3 A continuous operation Load power limited to 45 WMinimum four-point average efficiency in active mode Efficiency > ...
The ON Semiconductor STR-USBC-4PORT-200W-EVK is 4-port, 200W USB-PD ...
Description:
The ON Semiconductor STR-USBC-4PORT-200W-EVK is 4-port, 200W USB-PD source which houses a wide selection of power solutions. This evaluation board is designed to enable development and prototyping of USB-PD (USB Power Delivery) applications. USB-PD is a very advanced and fast charging protocol. The STR-USBC-4PORT-200W-EVK is designed for wearables, notebook computers, ...