ON Semiconductor BLE-SWITCH001-GEVB, RSL10 SIP Bluetooth Development Kit Energy Harvesting Bluetooth Low Energy Switch

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The Energy Harvesting Bluetooth® Low Energy Switch is a complete reference design for energy harvesting applications including lighting, door and window control, and step counters. Featuring the RSL10 SIP and high-efficiency harvester switch from ZF Electronic, the battery-less switch offers the Lowest power consumption and is entirely self-powered. Using the provided firmware and RSL10 Software Development Kit (SDK), the battery-less switch is easily customizable

Features RSL10 SIP
2 Mbps data rates (Bluetooth 5)
62.5 nW power consumption in Deep Sleep Mode, 7 mW in Peak Receiving
Fully integrated antenna with no additional RF considerations
Segger compatible programming interface
Compatible with the IoT Development Kit and Bluetooth IoT Development Kit
Easily connect to standard BLE scanner or mobile/lighting applications (IoS and Android)
Simple Power Supply Schematic
Full linear voltage regulation (no switching)
No EMC during energy conversion, no perturbation of Bluetooth Low Energy Tx / Rx
No need for scheduler
Instant startup
Provides 25 % reduced Bill of Materials
No buck boost or coil

Specifications
Attribute Value
RF Technology Bluetooth
Classification Development Kit
Kit Classification Development Kit
For Use With NCH-RSL10-101S51-ACG, NCH-RSL10-101WC51-ABG
Featured Device RSL10 SIP
Kit Name Energy Harvesting Bluetooth Low Energy Switch
3 In stock - FREE next working day delivery available
Price Each
£ 10.93
(exc. VAT)
£ 13.12
(inc. VAT)
Units
Per unit
1 +
£10.93
Related Products
The Si Py is a Micro Python enabled ...
Description:
The Si Py is a Micro Python enabled Wi Fi, Bluetooth and Sigfox development board designed specifically for IoT applications. At its heart is the Espressif ESP32 System on Chip (So C) featuring a dual-core microcontroller, Wi Fi, Bluetooth, Sigfox and 512 KB RAM. All this power packed into a ...
The ATULPC-DEMO Wearable Demo Reference Design evaluation kit ...
Description:
The ATULPC-DEMO Wearable Demo Reference Design evaluation kit is a hardware platform for developing IoT and Wearable projects. It features a SAML21 low-power microcontroller, a Bluetooth Smart communications module, and an array of motion and environmental sensors. The wearable demonstration requires an Android smartphone running an App downloadable from: ... ...
The ATWILC3000-SHLD evaluation kit is a hardware platform ...
Description:
The ATWILC3000-SHLD evaluation kit is a hardware platform to evaluate the ATWILC3000-MR110CA module. The ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller with support for BLE 4.0. The ATWILC3000 supports single stream 1x1 802.11n mode providing up to 72 Mbps throughput. The ATWILC3000 features fully-integrated Power Amplifier, ...
The ATWINC3400-XPRO evaluation kit is a hardware platform ...
Description:
The ATWINC3400-XPRO evaluation kit is a hardware platform to evaluate the WINC3400-MR210CA module. The WINC3400 is an IEEE 802.11 b/g/n/BLE4.0 IoT network controller SoC. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and BLE Network capabilities through SPI-to-Wi-Fi interface. The WINC3400 connects to any PIC or SAM ...