FTDI Chip TTL-234X-3V3-2mm for use with VDRIVE2 or VMUSIC2 Modules

  • RS Stock No. 150-1564
  • Mfr. Part No. TTL-234X-3V3-2mm
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TTL-234X Converter Cable provides a USB to TTL Serial interface with various end connectors.
On board FT234XD provides single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled by the electronics in the cable USB.
Connect directly to a microcontroller UART or I/O pins.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

The TTL-234X-3V3-2mm cable is terminated by an 8 way, 2mm pitch, Single-In-Line (SIL) keyed connector. The TTL-234X-3V3-2mm operates at +3.3V levels (signals only, VCC=+5V). These cables are primarily intended for interfacing the FTDI VDRIVE2 and VMUSIC2 modules. Note that when connected to VDRIVE2 or VMUSIC2 module, the TTL-234X-3V3-2mm cable 8-way connector pin 1 connects to pin 8 of the module, and pin 8 of the cable connects to pin 1 of the cable.

Attribute Value
For Use With VDRIVE2 or VMUSIC2 Modules
41 In stock - FREE next working day delivery available
Price 1 Bag of 1
£ 17.09
(exc. VAT)
£ 20.51
(inc. VAT)
1 - 4
5 - 9
10 - 24
25 - 49
50 +
Related Products
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated ...
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated by a standard 3.5mm Audio Jack (AJ) connector. The difference between the two cables is that the TTL-234X-5V-AJ operates at +5V levels and the TTL-234X-3V3-AJ operates at +3.3V levels. On these cables the VCC power is not transferred. TTL-234X Converter Cable provides ...
The VNC2 is the second of FTDI’s Vinculum ...
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), Printer, HID (human interface devices). For mass storage devices such ...
V2-Eval Board is intended for use as a hardware platform to enable easy evaluation of FTDI“s Vinculum-II VNC2 series of embedded USB Host / Slave controllers. The V2-Eval Board includes all the necessary components required by a user to begin developing USB Host / Slave system applications based on the ...
The FTDI Chip serial to USB connector module ...
The FTDI Chip serial to USB connector module can be used to upgrade an RS232 port to an active USB port without the need to redesign the PCB. This active connector contains all the USB to UART (vice-versa) conversion electronics and is designed to fit directly into the same PCB ...