Microchip, MCP2200 USB to UART Development Kit - ADM00276

  • RS Stock No. 111-5748
  • Mfr. Part No. ADM00276
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP2200 Isolated USB to UART Development Kit

The MCP2200 is a UART development kit designed to be used in investigating the capabilities of the MCP2200. This board is powered via the hosts USB port for ease of use and the board is shielded in a ABS protective over. There are 3 LEDS on board to indicate power and two others to indicate data flowing through the TX & RX pins. The MCP2200 has an isolated power side that needs to be powered with 3V to 5.5V & the board offers 3.75 kV AC of electrical isolation for power and UART signals.

Features and Benefits:

  • LEDs to indicate USB to UART traffic flow

  • Isolated power LED that indicates power to the isolated side

  • Simply powered by a USB from the host board

  • 6-pin PICkit serial header with UART and power signals

  • Isolated transceiver powered externally from the isolated side with 3V to 5.5V – also doubles up as voltage level translator

Software:

Microchip provides a free software to be used with this board. They also provide a DLL so that you can customise and develop your own configurations. You can find the links below.

  • http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2200_DLL_2014-10-10.zip

  • http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2221%20Windows%20Driver%202014-10-09.zip

Whats in the box?

  • 1x MCP2200 USB to UART isolation demo board

  • 1x Mini USB cable

  • 1x Protective ABS case

  • 1x Information sheet

I/O Peripherals - Microchip

Specifications
Attribute Value
Kit Classification Development Kit
Kit Name MCP2200
13 In stock - FREE next working day delivery available
Price Each
£ 37.99
(exc. VAT)
£ 45.59
(inc. VAT)
Units
Per unit
1 +
£37.99
Related Products
The ST25DV-DISCOVERY is a demonstration kit to evaluate ...
Description:
The ST25DV-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the ST25DV series of dynamic NFC/RFID tag ICs. • 168MHz STM32F415VGT6 Cortex-M4F MCU with 1MB Flash memory, 192 + 4KB SRAM • On-board ST-LINK hardware for microcontroller firmware upgrade and debug • Harvested energy measurement circuit • ...
S2-LP narrow band ultra-low power sub-1GHz transceiver in ...
Description:
S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands STM32 Nucleo-64 development board with STM32L0 MCUSuitable for wireless M-Bus systems Associated S2-LP development kit including, documentation, firmware for STM32L and GUIProgrammable RF output power up to +16 d BmModulation schemes: 2-FSK, ...
USB Type-C and USB-PD Support Supports USB PD3.0 ...
Description:
USB Type-C and USB-PD Support Supports USB PD3.0 Version 1.1 Spec including Programmable Power Supply Mode Configurable resistor RDSupports one USB Type-C port Legacy Charging Sink Block Supports Apple charging 2.4A, USB BC 1.2Integrates all required terminations on D+/D- lines System-Level Fault Protection VBUS to CC Short Protection On-chip overvoltage ...
Driver Support for Windows® 7, Windows Vista®, and ...
Description:
Driver Support for Windows® 7, Windows Vista®, and Windows XP® Operating Systems Enumerates as a Virtual PC COM Port by Use of the Prolific PL-2303HXD USB-to-UART Bridge ICEmulates the DS2480B 1-Wire Line Driving Functionality1-Wire OTP/EPROM Programming Provided Without the Need of an External Power Supply (12V on OW, 7V on ...