RS PRO 75Ω Straight Panel Mount BNC ConnectorBulkhead Fitting, jack

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO 75Ω Isolated Bulkhead BNC Connector

From RS PRO, this straight BNC coaxial connector is designed for use with coaxial cables, and features a bulkhead and screw on nut for mounting to panels and chassis.

The connector has a robust nickel plated body, and features the secure and convenient bayonet coupling system typical of a BNC connector. The centre pin contact is gold plated, for excellent conductivity over a long service life, and there is also a PTFE insulator for increased reliability.

Features and Benefits

• BNC plug with bulkhead
• Nickel plated body provides a heavy-duty build quality
• Gold contacts ensure maximum efficiency
• Crimp termination method
• 75 Ω impedance
• Operating frequency of 4GhZ
• Insulation material: PTFE

Applications

BNC connectors are used in a variety of RF signal applications. Though they are most commonly used in radio and television broadcast applications, they can also be used in medical and test equipment.

• Antenna connection
• Cable Modems
• Telecom
• Medical Equipment
• Satcom
• CCTV

FAQs

Q: How should I connect a BNC connector to a coaxial cable?

A: This BNC connector is crimp terminating, and can be easily attached by compressing the crimp ferrule onto an appropriate cable. Crimp tooling is required to affectively achieve termination.

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Approvals

N/A

RS BNC Connectors

RS BNC connectors are suitable for a variety of applications including video signalling and test equipment.

Specifications
Attribute Value
Gender Female
Coaxial Connector Type BNC Connector
Mounting Type Panel Mount
Impedance 75Ω
Termination Method Solder
Body Orientation Straight
Bulkhead Yes
Body Plating Nickel
Polarity Normal
Contact Material Brass
Contact Plating Gold
35 In stock - FREE next working day delivery available
Price Each
£ 2.56
(exc. VAT)
£ 3.07
(inc. VAT)
Units
Per unit
1 - 24
£2.56
25 - 99
£2.41
100 - 249
£1.78
250 - 499
£1.65
500 +
£1.55
Related Products
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection and insulated thermoplastic housings. The right angle versions of these ...
75 Ohm Professional Grade BNC front mount bulkhead ...
Description:
75 Ohm Professional Grade BNC front mount bulkhead solder jack with ABS dielectric, solder terminal, nickel plated body and silver center contact. This 75 Ohm Professional Grade BNC bulkhead solder jack uses a panel cut out of 8.9 x 9.6mm and is for use with a panel thickness of 1.52mm. ...
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection and insulated thermoplastic housings. The right angle versions of these ...
75 Ohm ZDC/BNC shielded right angle/elbow mount PCB ...
Description:
75 Ohm ZDC/BNC shielded right angle/elbow mount PCB socket with solder terminal, polyethylene dielectric and nickel plated zinc body. This 75 Ohm ZDC/BNC shielded right angle/elbow mount PCB jack is rear panel mounting with bulkhead, hex nut retention and requires a panel cut-out of 12 x 12.9mm. TE Connectivity 75 ...