AC / DC current clamp to expand the measuring ranges of Fluke SCOPE meters and oscilloscopes
The Fluke AC/DC probe that can be used to measures current up to 100A (AC/DC). It is compatible with any Fluke ScopeMeter® test tools, power harmonics analyser, oscilloscope, multimeter or other voltage measurement devices. The specially designed built-in safety features such as the 600Vrms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems this probe is shielded for high noise immunity to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. It is used in clamp meters.
Current ranges are 0 to 10ADC or ac peak and 0 to 100A dc or ac peak
Output signals are 10A range: 100mV/A and 100A range: 10 mV/A
Temperature coefficient is 2000 ppm/°C maximum for temperature from 0 °C to 50 °C
Output cable: length is 1.6m
Maximum jaw opening: is 12.5mm
40A to 80A +/-12% of reading +50mA
80A to 100A +/-15% of reading
Operating temperature ranges between 0°C and 50°C
9V battery ( IEC 6LR61)
Battery indicator (ON)
Overload indicator (OL)
IEC 1010-1
CSA-C22.2
UL1244
CAT II 600V CAT III, 300V safety rating
Attribute | Value |
---|---|
Absolute Maximum AC Current Measurement | 100A ac |
Absolute Maximum DC Current Measurement | 100A dc |
Model Number | 80 |
Best DC Current Accuracy | ±3% + 50 mA |
Clamp Meter Type | Current |
Best AC Current Accuracy | ±3% +50 mA |
Maximum Conductor Size | 11.8mm |
Battery Life | 55 h |
Safety Category Voltage | 300 V, 600 V |
Weight | 330g |
Safety Category | CAT II 600 V, CAT III 300 V |
Height | 36mm |
Functions Measured | AC Current, DC Current |
Length | 231mm |
Power Source | Battery |
Maximum Operating Temperature | +50°C |
Jaw Capacity Busbars | 12.5mm |
Dimensions | 231 x 67 x 36mm |
Minimum Operating Temperature | 0°C |
Safety Category Level | CAT II, CAT III |
Battery Type | 9V |
Width | 67mm |