- RS Stock No.:
- 190-3425
- Mfr. Part No.:
- TNA16DCR0-02B / 192900-0393
- Brand:
- ITT Cannon
- RS Stock No.:
- 190-3425
- Mfr. Part No.:
- TNA16DCR0-02B / 192900-0393
- Brand:
- ITT Cannon
Technical Reference
Legislation and Compliance
Product Details
Dust Caps
Plastic dust-caps for plug and socket panel housings. Only the shell size is required to determine the correct cap. Caps include a plastic retaining strap.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Specifications
Attribute | Value |
---|---|
Gender | Male |
Shell Size | 16 |
IP Rating | IP67 |
Panel Mount Fitting | Yes |
Material | Polymer |
Colour | Grey |