Ceramic Heating Element, 245mm, 500 W, 230 V ac

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Ceramic Heating Elements

These heating elements are extremely energy efficient converting 96% of the input power to heat with a maximum temperature of 700ºC

5000 - 10,000 hours working life Available in two sizes and with or without integral type K thermocouple for monitoring and control
Heating wire embedded into concave shaped heater creates infrared in parallel rays
230V ac supply
Suitable for long wave radiation, curing, heating and drying
Thermocouple included with RS Stock Numbers - 376-2688, 376-2694 and 376-2701

Note

Stock Item 376-2672 has a built in Thermocoupler and is 4 wire.

Multi-Purpose Process Heaters

In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.

Warning

  • These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Specifications
Attribute Value
Heating Element Form Curved Ceramic Element
Power Rating 500 W
Supply Voltage 230 V ac
Length 245mm
Width 60mm
Thickness 31mm
Dimensions 245 x 60 x 31 mm
Available to back order for despatch 26/10/2020
Price Each
£ 18.83
(exc. VAT)
£ 22.60
(inc. VAT)
Units
Per unit
1 - 4
£18.83
5 - 9
£18.25
10 +
£17.84
Related Products
The ACIM Jouanin flat bracket 750W strip heater ...
Description:
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C. Note:To obtain optimum performance from these products, it is advised that temperature sensing and control elements ...
The ACIM Jouanin flat bracket 1kW strip heater ...
Description:
The ACIM Jouanin flat bracket 1kW strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C. Note:To obtain optimum performance from these products, it is advised that temperature sensing and control elements ...
Sealed shielded clamps for heating cylindrical parts such ...
Description:
Sealed shielded clamps for heating cylindrical parts such as press nozzles for injecting thermoplastic materials or any other application requiring a perfect seal on resistance and electrical connection. Sealed brass band heater with folded ends Silver solder seal Band heater connection with waterproof technology Electric insulation by mica plate Asymmetric ...
Formable heating resistors can take on any shape ...
Description:
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.The resistor ...