Pepperl + Fuchs 50mm Non Flush Mount Capacitive sensor, PNP-NO Output, 2 mm Detection Range, IP67

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Basic Series - Mini Flat

PBT flat housing and sensing face
Ingress protection to IP67
LED indicator
Operating temperature range -25 to +70°C
Pre-Wired with 2m of 0.14mm² PVC cable
Can be cable tie mounted via slots or Screw mounted via fixing holes
50x25x5mm (LxHxW)

Pepperl & Fuchs

Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch.

Specifications
Attribute Value
Body Style Block
Output Type PNP-NO
Detection Range 2 mm
Supply Voltage 10 → 30 V dc
Terminal Type Cable
IP Rating IP67
Maximum DC Voltage 30V
Mounting Style Non Flush
Length 50mm
Width 20mm
Depth 5mm
Switching Current 100 mA
Dimensions 50 x 20 x 5 mm
Maximum Operating Temperature +70°C
Short Circuit Overload Protection Yes
Reverse Polarity Protection Yes
Switching Frequency 0 → 10 Hz
Housing Material PBT
Minimum Operating Temperature -25°C
9 In stock for FREE next working day delivery
Price Each
£ 67.40
(exc. VAT)
£ 80.88
(inc. VAT)
Units
Per unit
1 +
£67.40
Related Products
ifm electronic KI5 M30 capacitive sensors feature a ...
Description:
ifm electronic KI5 M30 capacitive sensors feature a 12-LED bar display to give visibility of sensor performance allowing the adaption of the switch point to suit the application conditions. The green LEDs either side of the switch point indicate the reliability of the switch point. Deposits and material changes are ...
M12 capacitive sensor for detecting materials with a ...
Description:
M12 capacitive sensor for detecting materials with a relative permittivity greater than 1 (air, vacuum).Use for detection through packaging (water in a bottle), synthetic boxes, loose or granulated products.Protected against short circuits and polarity reversal.
High hysteresis and low sensitivity make these sensors ...
Description:
High hysteresis and low sensitivity make these sensors suitable for dirty environments. Rugged and robust Rated to IP675A changeover relay - fully isolated Temperature range -10 to +55°CDimensions: 31mm diameter, 134mm length1.5m cable PG36 mounting gland included.
The E2K-F sensor is a flat capacitive proximity ...
Description:
The E2K-F sensor is a flat capacitive proximity sensor with a thickness of only 10mm making it ideal for places where space is limited. Heat-resistant ABS resin case NPN open collector output Direct mounting onto a metallic surface possible LED indication Surge suppressor and power supply reverse polarity protection Rated ...