Legrand Heavy Duty 90° Flat Bend Hot Dip Galvanised Steel Cable Tray Tee, 100 mm Width, 50mm Depth

  • RS Stock No. 798-9512
  • Mfr. Part No. SRFT100G
  • Brand Legrand
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Swifts® SRF Heavy Duty Equal Tee

Hot dip galvanised after manufacture

Legrand Swifts® SRF Heavy Duty Cable Tray

Specifications
Attribute Value
Accessory Type Heavy Duty 90° Flat Bend
Material Hot Dip Galvanised Steel
Series Swifts
Width 100 mm
Depth 50mm
Available to back order for despatch 19/02/2020
Price Each
£ 38.27
(exc. VAT)
£ 45.92
(inc. VAT)
Units
Per unit
1 - 4
£38.27
5 - 24
£37.11
25 +
£36.02
Related Products
75 mm (852-520) or 150 mm (852-536) width1mm ...
Description:
75 mm (852-520) or 150 mm (852-536) width1mm thick 316 stainless steel M6 x 12 bolts and nuts available in bags of 100.
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the ...
Pre-galvanised medium duty couplers Couplers are required for ...
Description:
Pre-galvanised medium duty couplers Couplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drilling MRFC standard couplers are supplied in pairs MRFC standard coupler is supplied singly.