Legrand Trapeze Hanger Hot Dip Galvanised Steel Support Rail, 100 mm Width

  • RS Stock No. 163-3085
  • Mfr. Part No. LTH100G
  • Brand Legrand
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the table

Specifications
Attribute Value
Accessory Type Trapeze Hanger
Material Hot Dip Galvanised Steel
Duty Type Heavy Duty, Light Duty, Medium Duty
For Use With M10 Threaded Rod
Width 100 mm
Series LTH
Tray and Basket Type Cable Tray
4 In stock for FREE next working day delivery
Price Each
£ 4.96
(exc. VAT)
£ 5.95
(inc. VAT)
Units
Per unit
1 - 9
£4.96
10 +
£4.46
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above ...
Pre-galvanised medium duty equal tees. ...
Description:
Pre-galvanised medium duty equal tees.