ETA Busbar, 24V dc, 500mm Pitch

  • RS Stock No. 723-4862
  • Mfr. Part No. X222.611.02 GREY BUSBAR (500MM)
  • Brand ETA
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ESX10-T Electronic Circuit Protectors

Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics
Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections
Manual ON/OFF button (S1)
Status and failure indication through LED, status output SF or Si contact F
Integral fail-safe element adjusted to current rating
Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets
Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

Approvals

UL, CSA

Specifications
Attribute Value
Rated Operational Voltage 24V dc
Current Rating 500 mA
Pitch 500mm
16 In stock - FREE next working day delivery available
Price Each
£ 61.79
(exc. VAT)
£ 74.15
(inc. VAT)
Units
Per unit
1 - 9
£61.79
10 - 24
£59.85
25 - 49
£58.05
50 - 99
£56.34
100 +
£54.73
Related Products
Splitters for XE plug-in technology.A connector combined with ...
Description:
Splitters for XE plug-in technology.A connector combined with a splitter supplies two rows. stock no. 145-279.Rated operating current: 63 A @ 40 °C.Rated insulating voltage: 250 Vac Mounting on support provided at the back of the symmetrical rail on Opale and Pragma evolution enclosures. Distri'clic XE splitters.
SMISSLINE busbar system For installation on standard DIN ...
Description:
SMISSLINE busbar system For installation on standard DIN rails or for screw installation For directly attaching SMISSLINE devices in any arrangement Load capacity per phase 100 A. Plug base rail system sets, pre-equipped.
Front mounting (automatic insertion), screwless Isolated and separable ...
Description:
Front mounting (automatic insertion), screwless Isolated and separable Consecutive or alternating connection For 10 blocks with 5 mm pitch - blue.
Busbar system Busbar center-to-center spacing 60 mm Device ...
Description:
Busbar system Busbar center-to-center spacing 60 mm Device adapter, Width: 55 mm Bar thickness: 5.10 mm+TT profile for contactor with overload relay 3R, S2 with 1 DIN rail 35 mm, up to 56 A Length 182 mm.