3 Phase Brake Module, 4 kW, 400 V

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Crompton Modules

To ensure compliance with the PUWER 98 regulations, machines such as woodworking equipment must be fitted with a suitable automatic braking device, which ensures the tool stops moving within 10 seconds
They must be fitted to new and current equipment
Fitting of a brake module is easy, with minimum of disruption to existing wiring when retro-fitting
3 phase
Adjustable dc injection time 0.5-25s
Integral DOL starter
IP55 protection rating


These types of units are suitable for applications requiring compliance with PUWER 98.

DC Brake Modules

A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a stop, by injecting a d.c. current into two of the motor terminals and neutralising the rotating magnetic field in the motor after the 3 phase supply has been disconnected. This stops the motor coasting to a halt and reduces the delay time by this enforced braking. They can be used with a standard 3 phase induction motor. The unit may be located on a piece of machinery or adjacent to it, with little disruption or modification required to the existing wiring. The Powerbrake units provide a simple cost-effective solution to motor braking, which is maintenance and wear-free.,Brake Module - For a brake unit, all the control wiring has to be supplied and installed by the customer, including interlocked contactors and pushbuttons.,Production Brakes - Enclosed brakes with all control wiring included, optional DOL starter built in Injects DC on EVERY stop.,Critical Brake - Enclosed brake with contactors built in. Must be used with existing starter, also AC must pass through the unit so that it can be isolated before DC is injected. Only injects DC when E-stop activated.

Attribute Value
Phase 3
Power Rating 4 kW
Supply Voltage 400 V
Injection Time 0.5 → 25 s
Enclosure Size 184 x 184 x 149mm
IP Rating IP55
Enclosure Length 184mm
Enclosure Width 184mm
Enclosure Depth 149mm
5 In stock for FREE next working day delivery
Price Each
£ 486.00
(exc. VAT)
£ 583.20
(inc. VAT)
Per unit
1 +
Related Products
Braking resistors allow Altivar 71 drives to operate ...
Braking resistors allow Altivar 71 drives to operate while braking to a standstill, by dissipating the braking energy.They enable maximum transient braking torque.Applications are for inertia machines and machines with cycles. Degree of protection is IP20Mounted on the outside of the enclosure.
The BA9034N incorporates automatic standstill monitoring alongside a ...
The BA9034N incorporates automatic standstill monitoring alongside a contactor connected to the DC relay output. Motor restart while DC braking current injection can be avoided thanks to an inter-lock contact & built in safety brake. Asynchronous motor brake relays are suitable for a variety of both single & three phase ...
Ether Net - The 22-COMM-E Ether Net/IP adapter ...
Ether Net - The 22-COMM-E Ether Net/IP adapter provides an internal Ether Net/IP connection for Power Flex 40 drives. The adapter allows the drive to be controlled, configured, and data to be collected via an Ether Net/IP network. Web services are also provided and pages can be viewed with standard ...
SINAMICS G120 Power Module PM 250 with integrated ...
SINAMICS G120 Power Module PM 250 with integrated Class A filter capable of energy recovery. 380-480 V 3 AC +10/-10% 47-63 Hz Power high overload: 11kW at 200% 3s, 150% 57s, 100% 240 s, Ambient temperature 0 to +50 °C Power low overload: 15kW at 150% 3s, 110% 57s, 100% ...