Maxim MAX6816EUS+T, Bounce Eliminator Circuit, 2.7 V to 5.5 V, 4-Pin SOT-143

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Switch Debounce ICs, Maxim Integrated

A range of Switch Debounce ICs that are intended to ensure a clean interface between electromechanical switches and subsequent digital circuitry. The debounce function is effective on both closing and opening switch operations, and no additional components are required.

Inputs are ESD protected to ±15kV
Single supply operation: 2.7 to 5.5V
Tolerant of ±25V signal inputs

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Switch Debounce

Specifications
Attribute Value
Logic Family CMOS
Number of Channels 1
Propagation Delay Time 100ns
Mounting Type Surface Mount
Package Type SOT-143
Pin Count 4
Dimensions 3.04 x 1.4 x 1.07mm
Length 3.04mm
Width 1.4mm
Height 1.07mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
128 In stock for FREE next working day delivery
Price Each
£ 2.13
(exc. VAT)
£ 2.56
(inc. VAT)
Units
Per unit
1 - 9
£2.13
10 - 24
£1.52
25 - 49
£1.42
50 +
£1.34
Packaging Options:
Related Products
The NLX series from ON Semiconductor are advanced ...
Description:
The NLX series from ON Semiconductor are advanced high-speed CMOS logic gates. The NLX devices offer small package sizes and provide protection when voltages of up to 7V are applied. Low power dissipation24 mA balanced output source and sink capability Overvoltage tolerant (OVT) input/output pins.
+2.7V to +5.5V Single-Supply Operation Ultra-Low Supply Current0.2mA ...
Description:
+2.7V to +5.5V Single-Supply Operation Ultra-Low Supply Current0.2mA while Operating1nA in Shutdown Mode Ultra-Small 16-Pin TSSOP Package Ground to VDD Reference Input Range Output Buffer Amplifiers Swing Rail-to-Rail Power-On Reset Sets All Registers to Zero Applications Digital Gain and Offset Control Portable Instrumentation Power-Amp Bias Control Programmable Attenuators.
Ultra-Low Power Consumption229μA at VDD = +3.6V271μA at ...
Description:
Ultra-Low Power Consumption229μA at VDD = +3.6V271μA at VDD = +5.5V Wide +2.7V to +5.5V Single-Supply Range10-Pin μMAX Package0.3μA Power-Down Current Guaranteed 12-Bit Monotonicity (±1 LSB DNL)Safe Power-Up Reset to Zero Volts at DAC Output Three Software-Selectable Power-Down Impedances (100kΩ, 1kΩ, Hi-Z)Fast 20MHz 3-Wire SPI, QSPI, and MICROWIRE-Compatible Serial Interface ...
I²C Host Interface, Supports 100k Hz and 400k ...
Description:
I²C Host Interface, Supports 100k Hz and 400k Hz I²C Communication Speeds 1-Wire Master I/O with Selectable Active or Passive 1-Wire Pullup Provides Reset/Presence, 8-Bit, Single-Bit, and Three-Bit 1-Wire I/O Sequences Eight Channels of Independently Operated 1-Wire I/O Standard and Overdrive 1-Wire Communication Speeds Slew Controlled 1-Wire Edges Supports Low-Impedance ...