Aim-TTi Digital Bench Power Supply 280W, 2 Output 0 → 35V 0 → 4A With UKAS Calibration

  • RS Stock No. 125-0815
  • Mfr. Part No. EX354RD
  • Brand Aim-TTi
Technical Reference
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): GB
Product Details

EX-R Series Single, Dual and Triple Output PSUs

The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.

Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)

EX Series: EX355P

Opto-isolated RS-232 interface
Front panel controls can be locked out

The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.

EX752M Digital Multi-mode Dual Output PSU

Separate voltage and current meters for each output
Safety output terminals

EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT

Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A

Approvals

EN61010-1 (Safety) and EN61326 (EMC)

Supplied with

user manual and mains lead

Specifications
Attribute Value
Output Voltage 0 → 35V
Output Current 0 → 4A
Number of Outputs 2
Type Digital
Power Rating 280W
Supply Voltage 110 → 240V ac
Number of Displays 4
Output Connector Binding Post Terminal
Calibrated UKAS
Minimum Temperature +5°C
Maximum Temperature +40°C
41 In stock for delivery within 2 working days
Price Each
£ 518.00
(exc. VAT)
£ 621.60
(inc. VAT)
Units
Per unit
1 +
£518.00
Not available for guaranteed pre 9am/10am delivery
Related Products
ELC programmable power supply ALR3206D offers automatic constant ...
Description:
ELC programmable power supply ALR3206D offers automatic constant voltage and constant current operation. Its floating outputs are on 4 mm safety terminals in the front panel and on a spring terminal block on the rear panel. ALR3206D incorporates protection against short circuits (by current regulation), overtemperature (by fan and thermal ...
The TSX model incorporates conventional analog controls for ...
Description:
The TSX model incorporates conventional analog controls for precision with Simplicity. Coarse and fine voltage controls offer fast setting with high setting resolution at all levels while a semi-logarithmic current control provides resolution commensurate with the current level. Fan-free operation means that these PSUs add no noise to the bench ...
A versatile dual output power supply in a ...
Description:
A versatile dual output power supply in a robust steel case capable of up to 35V and up to 10A (CPX200) ,up to 60V and up to 20A (CPX400A) output whilst noise and RFI specifications are comparable with a good linear PSU. 2 x Independent outputs up to 175W (CPX200) ...
30W to 130W Linear, Single, Dual & Triple ...
Description:
30W to 130W Linear, Single, Dual & Triple Output. Single outputs 30V/1A, 18V/3.3A, 56V/1.1A,15V/5A, 30V/3ASingle, dual or triple outputs, 30V/2AIndependent digital voltage and current meters for each output with 4 digit resolutionSwitchable local or remote sensingConstant voltage or constant current operationVariable 1.5 - 5.0V auxiliary output at 2A (EL302RT)Compact design ...