- RS Stock No.:
- 750-8952
- Brand:
- RS PRO
- RS Stock No.:
- 750-8952
- Brand:
- RS PRO
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- CN
Product Details
RS PRO Pillow Block Bearing 25 mm ID
Pillow block bearings like this 25 mm model from RS PRO are used to support a rotating shaft. Also called plummer blocks, they comprise a cast iron mounting block with an inner bearing.
This pedestal-mounted bearing has an overall height of 71 mm and a depth of 34 mm, and is 140 mm long. It's been designed to minimise as much friction as possible within your equipment. The shaft and insert are supplied with two bolts, which provides more security than a single bolt set-up.
Part of the tried and tested RS PRO range, this product has undergone stringent quality controls to ensure a hardwearing, safe product with a long lifetime.
Pillow blocks are used for a great many commercial and industrial applications, including agricultural machinery and conveyor systems.They are especially suited to applications with low load-bearing requirements, such as gearboxes and fans.
This pedestal-mounted bearing has an overall height of 71 mm and a depth of 34 mm, and is 140 mm long. It's been designed to minimise as much friction as possible within your equipment. The shaft and insert are supplied with two bolts, which provides more security than a single bolt set-up.
Part of the tried and tested RS PRO range, this product has undergone stringent quality controls to ensure a hardwearing, safe product with a long lifetime.
Pillow blocks are used for a great many commercial and industrial applications, including agricultural machinery and conveyor systems.They are especially suited to applications with low load-bearing requirements, such as gearboxes and fans.
Features and Benefits
Two-bolt pillow block bearing
Mount hole size of 13 mm
For a low-friction solution
Cast-iron housing
The bearing housing has dimensions of 71 mm (H) x 34 mm (D) x 140 mm (L)
Inside diameter of 25 mm
Mount hole measurement centre-to-centre 105 mm
Centre height of 36.5 mm
Mount hole size of 13 mm
For a low-friction solution
Cast-iron housing
The bearing housing has dimensions of 71 mm (H) x 34 mm (D) x 140 mm (L)
Inside diameter of 25 mm
Mount hole measurement centre-to-centre 105 mm
Centre height of 36.5 mm
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specifications
Attribute | Value |
---|---|
Inside Diameter | 25mm |
Bearing Unit Type | Pillow Block |
Material | Cast Iron |
Centre Height | 36.5mm |
Mount Hole Size | 13mm |
Length | 140mm |
Depth | 34mm |
Overall Height | 71mm |
Mount Hole Centre-to-Centre | 105mm |