Pillow Block Bearing SL12, 12mm ID

  • RS Stock No. 212-8475
  • Mfr. Part No. SL12
  • Brand NSK-RHP
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Self-Lube Pillow Block Bearing

Cast iron self lubricated pillow block bearings from NSK. These pillow block bearings are easy to fit and long lasting. Designed to accommodate an initial housing misalignment of up to 0.030 radians.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
Supplied with full fitting instructions
C3 internal radial clearance
Slotted bolt holes

Supplied with

grease nipples.

Specifications
Attribute Value
Inside Diameter 12mm
Material Cast Iron
Centre Height 26.97mm
Mount Hole Size 10 mm
Length 119mm
Depth 30.5mm
Overall Height 54mm
Mount Hole Centre-to-Centre 91.5mm
Available to back order for despatch 02/03/2020
Price Each
£ 19.87
(exc. VAT)
£ 23.84
(inc. VAT)
Units
Per unit
1 - 4
£19.87
5 - 9
£19.07
10 - 24
£18.68
25 +
£18.28
Related Products
IGUBAL® pillow block bearings are self-lubricating and require ...
Description:
IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments. Spherical two bolt flange bearings compensate for alignment errors and avoid edge pressures Radial load ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts Quick fit/dismantle.
Designed specifically for use in industries where frequent ...
Description:
Designed specifically for use in industries where frequent thorough wash-downs are necessary, optimum hygiene standards are required and chemical resistance is important over a wide temperature range. Available in pillow block, two bolt flange configurations and are capable of accomodating initial misalignment whilst mounting Relubrication is possible through the grease ...
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported.