Plummer Block House SE 512-610, 55mm ID

  • RS Stock No. 506-741
  • Mfr. Part No. SE 512-610
  • Brand SKF
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

SNL Plummer Block Housed Units

The main benefit of split plummer block housings is their easy installation; pre-assembled shafts can be mounted in them. SNL Plummer blocks are primarily intended for self-aligning ball bearings, spherical roller bearings and CARB bearings.

Stiff Design - Insensitive to uncontrolled tightening of the attachment bolts and low operating temperatures
Excellent Heat Conduction - The extra ribs in the housing base provide additional surface area between the base and the base plate to improve heat flow away from the bearing, affording low bearing temperatures, high speed operation possible with oil lubrication, long relubrication intervals, long service life, low lubricant consumption
Additional Seals - Various sealing options are available for the plummer block housing

//media.rs-online.com/t_line/L0506729-01.gif

Plummer Blocks, Bearing Lubrication and Accessories

Specifications
Attribute Value
Inside Diameter 55mm
Material Cast Iron
Centre Height 70mm
Mount Hole Size 16 mm
Length 255mm
Depth 105mm
Overall Height 134mm
Mount Hole Centre-to-Centre 210mm
1 In stock for FREE next working day delivery
Price Each
£ 86.00
(exc. VAT)
£ 103.20
(inc. VAT)
Units
Per unit
1 - 4
£86.00
5 - 9
£82.56
10 - 24
£80.84
25 +
£79.12
Related Products
Double-lip L seals are made of thermoplastic elastomer ...
Description:
Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as the G seal. However they are only available for metric shafts in housing sizes 507-522, as of March ...
The bearing seating in the housing is sufficiently ...
Description:
The bearing seating in the housing is sufficiently wide to enable the bearing to be displaced axially Bearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing bore by locating rings at both sides The locating rings ...
Cast iron self lubricated pillow block bearings from ...
Description:
Cast iron self lubricated pillow block bearings from NSK. These pillow block bearings are easy to fit and long lasting. Designed to accommodate an initial housing misalignment of up to 0.030 radians. Made from cast iron to BS1452Spherical bearing insert accommodates initial misalignment Nitrile/fabric seals Supplied with full fitting instructionsC3 ...
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported.