Double Lip Seal TSN511L, 50mm ID

  • RS Stock No. 506-684
  • Mfr. Part No. TSN511L
  • Brand SKF
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Double-Lip Seal, Type L

Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as the G seal. However they are only available for metric shafts in housing sizes 507-522, as of March 2007. The double-lip L seals are identified by the designation prefix TSN, followed by the size identification and the suffix L, for example, TSN 511 L.

Plummer Blocks, Bearing Lubrication and Accessories

Specifications
Attribute Value
Inside Diameter 50mm
Material PUR
Centre Height 70mm
Mount Hole Size 16 mm
Length 255mm
Depth 95mm
Overall Height 128mm
Mount Hole Centre-to-Centre 210mm
For Use With Type L for Plummer Block Housed Units
5 in stock for FREE next working day delivery
10 available from Europe for delivery within 1 working day(s).
Price Each
£ 9.41
(exc. VAT)
£ 11.29
(inc. VAT)
Units
Per unit
1 - 4
£9.41
5 - 9
£9.04
10 - 24
£8.85
25 +
£8.66
Related Products
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during operation if necessary. The holes are closed off with set ...
Inner rings are used where:The shaft cannot be ...
Description:
Inner rings are used where:The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)Needle roller bearings must be ...
Inner rings are used where:The shaft cannot be ...
Description:
Inner rings are used where:The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)Needle roller bearings must be ...
Inner rings are used where:The shaft cannot be ...
Description:
Inner rings are used where:The shaft cannot be used as a rolling bearing raceway for needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings (it cannot be hardened and ground)Needle roller bearings must be ...