Ring Seal TSN511C, 50mm ID

  • RS Stock No. 506-630
  • Mfr. Part No. TSN511C
  • Brand SKF
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Felt Ring Seals Type C

Felt ring seals are simple but efficient seals for use with grease lubrication. They can be operated at peripheral speeds of up to 4 m/s (800 ft/min). The seals can be used at higher speeds, but a small gap forms between the felt and the shaft. As a result the seals become non-rubbing gap-type seals.
For pillow block housings with bearings on adapter sleeves and shafts not exceeding a surface roughness of Ra 3.2 μm, the felt ring seals are split. Oil-impregnated felt is inserted into Light Alloy half-rings and the seals inserted into the grooves of the housing. The rubber O-section cords should be put into the grooves first as they prevent the seals from turning.
SNL pillow block housings for bearings mounted on the cylindrical seatings of stepped shafts, sizes 205 to 218 inclusive, can also be supplied with felt seals. In this case, the seals consist of loose felt strips that can be inserted into the sealing grooves. Before mounting the FS felt strips, soak for a few minutes in hot oil. The permissible angular misalignment for felt seals is approximately 0.5°. The seal counterface on the shaft should be ground and the surface roughness should not exceed Ra 3.2 μm (125 RMS). The axial movement on the shaft relative to the housing is not limited when felt seals are used. The ready-to-mount felt ring seals (in Light Alloy half-rings) are always supplied in packs of two. The felt ring seals are identified by the designation prefix TSN followed by the size identification and the suffix C, for example, TSN 511 C.

Plummer Blocks, Bearing Lubrication and Accessories

Specifications
Attribute Value
Inside Diameter 50mm
Material Felt
Centre Height 70mm
Mount Hole Size 16 mm
Length 255mm
Depth 95mm
Overall Height 128mm
Mount Hole Centre-to-Centre 210mm
For Use With Type C for Plummer Block Housed Units
3 In stock for FREE next working day delivery
Price Each
£ 10.89
(exc. VAT)
£ 13.07
(inc. VAT)
Units
Per unit
1 - 4
£10.89
5 - 9
£10.45
10 - 24
£10.23
25 +
£10.02
Related Products
Double-lip L seals are made of thermoplastic elastomer ...
Description:
Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as the G seal. However they are only available for metric shafts in housing sizes 507-522, as of March ...
Also known as oil seals, these seals are ...
Description:
Also known as oil seals, these seals are ideal for excluding dirt, dust, water or any other contaminant whilst retaining lubricant in rotary shaft equipment. They are generally used as a means of protecting the bearings of rotating shafts. Replaceable without damage to the housing bore No need for circlips, ...
These seals prevent fluid flowing from adjoining housings.This ...
Description:
These seals prevent fluid flowing from adjoining housings.This range performs the dynamic sealing that takes place when two parts move one against the other.These seals for rotating shafts consist of three parts: seal armature, spring and nitrile elastomer.
Simmering Rotating shaft seals are a high performance ...
Description:
Simmering Rotating shaft seals are a high performance oil seal delivering exceptional wear resistance and performance to a variety of functions including aerospace, railway, power transmission, automotive, machine tools, fluid handling, production line, energy and power generation.With an elastomer outer casing manufactured from NBR 902 nitrile rubber and spring loaded ...