Locating Ring FRB 3.5/85, 40mm ID

  • RS Stock No. 505-697
  • Mfr. Part No. FRB 3.5/85
  • Brand SKF
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Locating Ring for Plummer Housings

The bearing seating in the housing is sufficiently wide to enable the bearing to be displaced axially
Bearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing bore by locating rings at both sides
The locating rings are identified by the prefix FRB followed by figures giving the width/outside diameter in millimetres, e.g. FRB 12.5/130

//media.rs-online.com/t_line/L0505697-01.jpg

Plummer Blocks, Bearing Lubrication and Accessories

Specifications
Attribute Value
Inside Diameter 40mm
Material Cast Iron
Centre Height 60mm
Mount Hole Size 12 mm
Length 205mm
Depth 85mm
Overall Height 109mm
Mount Hole Centre-to-Centre 170mm
2 In stock for delivery within 1 working days
Price Each
£ 3.50
(exc. VAT)
£ 4.20
(inc. VAT)
Units
Per unit
1 - 4
£3.50
5 - 9
£3.36
10 - 24
£3.29
25 +
£3.22
Not available for guaranteed pre 9am/10am delivery
Related Products
The main benefit of split plummer block housings ...
Description:
The main benefit of split plummer block housings is their easy installation; pre-assembled shafts can be mounted in them. SNL Plummer blocks are primarily intended for self-aligning ball bearings, spherical roller bearings and CARB bearings. Stiff Design - Insensitive to uncontrolled tightening of the attachment bolts and low operating temperatures ...
Cast iron self lubricated pillow block bearings from ...
Description:
Cast iron self lubricated pillow block bearings from NSK. These pillow block bearings are easy to fit and long lasting. Designed to accommodate an initial housing misalignment of up to 0.030 radians. Made from cast iron to BS1452Spherical bearing insert accommodates initial misalignment Nitrile/fabric seals Supplied with full fitting instructionsC3 ...
INA housing units are available as plummer block, ...
Description:
INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, ...
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported.