4 Hole Flanged Bearing, MFC40, 40mm ID

  • RS Stock No. 213-3017
  • Mfr. Part No. MFC40
  • Brand NSK-RHP
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

RHP - Self-Lube, Cast Iron, Cartridge Unit

Sealed bearing units to suit metric & imperial shafts.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
C3 internal radial clearance

Supplied with

grease nipples and full fitting instructions

Four-Bolt Flange Bearings - NSK

Specifications
Attribute Value
Material Cast Iron
Inside Diameter 40mm
Length 133.4mm
Width 133.4mm
Depth 42.5mm
Number of Mount Holes 4
Mount Hole Size 10 mm
Mount Hole Centre-to-Centre 111.1mm
Available to back order for despatch 03/02/2020
Price Each
£ 56.31
(exc. VAT)
£ 67.57
(inc. VAT)
Units
Per unit
1 - 4
£56.31
5 - 9
£54.05
10 - 24
£52.94
25 +
£51.81
Related Products
Two bolt flange bearing units from NSK. Made ...
Description:
Two bolt flange bearing units from NSK. Made from cast iron these self lubricated units are robust and long lasting. These bearing units are easy to fit and can be removed without any breakage allowing for easy re-fitting. Sealed bearing units to suit shaft diameters from 12mm to 40mm and ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts. Bore sizes 12 to 30mm & 1/2 in to 1 1/4 in internal diameter Quick fit/dismantle2-bolt & 3-bolt versions available, in Metric or Imperial sizes.
These flanged housing units have four bolts and ...
Description:
These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure. The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces. • Cast iron • Centring spigot • Eccentric locking collar ...
INA housing units are available as plummer block, ...
Description:
INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, ...