Texas Instruments BQ24450DW, Lead-Acid, Battery Charge Controller, >2A 16-Pin, SOIC

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Lead-Acid Battery Charge Controllers, Texas Instruments

Battery Management, Texas Instruments

Specifications
Attribute Value
Battery Type Lead-Acid
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Typical Operating Supply Voltage 5 → 40 V
Dimensions 10.5 x 7.6 x 2.35mm
Length 10.5mm
Maximum Operating Temperature +70 °C
Height 2.35mm
Width 7.6mm
Maximum Output Current >2A
Maximum Output Voltage 2.6 V
Minimum Operating Temperature -40 °C
Price Each (In a Tube of 40)
£ 7.765
(exc. VAT)
£ 9.318
(inc. VAT)
Units
Per unit
Per Tube*
40 +
£7.765
£310.60
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
BQ2002GSN | Texas Instruments BQ2002GSN, NiCD, NiMH, Charge ...
Description:
BQ2002GSN | Texas Instruments BQ2002GSN, NiCD, NiMH, Charge Management Controller 8-Pin, SOIC
The bq24650 provides input voltage regulation, which reduces ...
Description:
The bq24650 provides input voltage regulation, which reduces charge current when input voltage falls below a programmed level. The Charge Controller offers a constant-frequency synchronous PWM controller with high accuracy current and voltage regulation, charge pre-conditioning, charge termination, and charge status monitoring. Maximum Power Point Tracking (MPPT) Capability by Input ...
The isolated-flyback power supply controller provides Constant-Voltage (CV) ...
Description:
The isolated-flyback power supply controller provides Constant-Voltage (CV) and Constant-Current (CC) output regulation to improve transient response to large load steps. Primary-Side Regulation (PSR) eliminates the need for an Optocoupler. Current-Mode and Voltage-Mode PWM Controller Primary-Side Regulation Peak Power Mode Low Power.
The battery charge monitoring system is the component ...
Description:
The battery charge monitoring system is the component responsible for determining the energy remaining in the battery. It provides information such as remaining battery capacity (m Ah), state-of-charge (%), and battery voltage (m V). It minimises dependence on host processor and improves standby power. Safety protections such as over/under-​temperature, extra ...