222-29824, 64 Way DIN 41612 Eurocard Backplane FR4 Single Sided 84hp 15.24mm(3HP)

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Single-Sided Eurocard Backplanes

A 64-way single-sided Eurocard backplane suitable for use with 64//96 (a/c) DIN 41612 indirect edge connectors, in conjunction with Eurocard sub-racks to DIN 41494, e.g. the RS eurocard sub-rack system (except 4HP and 10HP card fronts).,Dimensions: Height 3U. Width 84HP. Pitch 0.6 in (15.24 mm). Lines 1, 2, 31 and 32 (a and c) are fully bussed for 3 rail and 0V power distribution.The absence of a grounding plane makes this backplane ideal for slow-speed non critical applications.,Mounting arrangements onto the RS sub-rack system is as depicted for the double-sided type

Supplied with

2 insulated mounted strips

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Specifications
Attribute Value
Connection DIN 41612
Number of Contacts 64
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Height 3U
Horizontal Pitch 84HP
Thickness 1.6mm
Pitch 15.24mm
25 In stock for FREE next working day delivery
Price Each
£ 82.38
(exc. VAT)
£ 98.86
(inc. VAT)
Units
Per unit
1 - 4
£82.38
5 - 9
£78.26
10 - 49
£74.13
50 +
£70.03
Related Products
Double sided backplanes 3U high with pth for ...
Description:
Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3. 96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be used for slower applications with a maximum of 84 seperate ...
This series of nut plates is designed to ...
Description:
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent cross-talk on series A and B.The power supply is via ...
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m (1 oz/ft). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 ...