Eaton, Auxiliary Contact, 10 A

  • RS Stock No. 219-1439
  • Mfr. Part No. HI11-P1/P3E-SOND
  • Brand Eaton
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Lockable in the 0/OFF position, with up to three padlocks
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Standards

IEC (EN60) 947, IEC (EN60) 204

Approvals

UL, CSA

Specifications
Attribute Value
Contact Current Rating 10 A
33 In stock for FREE next working day delivery
Price Each
£ 10.37
(exc. VAT)
£ 12.44
(inc. VAT)
Units
Per unit
1 - 14
£10.37
15 - 24
£9.74
25 +
£9.34
Related Products
316L stainless steel 1.2mm thick enclosures with RA104 ...
Description:
316L stainless steel 1.2mm thick enclosures with RA104 3.5mm gasket, protected to IP65External fixing lugsM5 self-retaining A4 stainless steel fixing screws.
Suitable for PXF and PFIM residual circuit breakers ...
Description:
Suitable for PXF and PFIM residual circuit breakers and PFR residual current relaysCan be screwed on retrospectively from left.
For fitting to front or right hand side ...
Description:
For fitting to front or right hand side of MPCB - PKZM0Standard versions operate when unit is 'ON' or 'OFF'Trip indicating versions identify overload and short-circuit conditions.
These modules plug in to the front of ...
Description:
These modules plug in to the front of a DILM motor contactor to provide additional contactsDILM32 auxiliary contacts to be used with DILM7 to DILM32 contactors. DILM150 auxiliary contacts to be used with DILM40 to DILM150 contactorsCurrent rating 3A (AC 15) @ 400V.