Vishay, DG2592DN-T1-GE4 Audio Control Circuit 1 2-Input 2-Output 10-Pin miniQFN

  • RS Stock No. 164-7576
  • Mfr. Part No. DG2592DN-T1-GE4
  • Brand Vishay
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The DG2592 is an audio jack detector and pop noise control switch IC. It integrates the circuits necessary to detect the presence of a stereo headset with a microphone and send / end control button. When there is no ear phone detected, the DG2592 connects the microphone bias line to ground through the MIC pin. The DG2592 also gives a logic high signal to the baseband controller through the DET pin. The DG2592 senses the DC levels at both L_Detect and GND_Detect. When an ear phone is plugged in, the voltage at both pins will go low. The DG2592 will indicate the presence of the ear phone by pulling DET low and the MIC switch will turn off.

Wide operating voltage range
Low quiescent current of 10 μA
ESD Protected
Ultra thin and compact miniQFN10 and UTDFN10

Specifications
Attribute Value
Number of Channels per Chip 1
Mounting Type Surface Mount
Package Type MiniQFN
Pin Count 10
Number of Inputs 2
Number of Outputs 2
Dimensions 1.9 x 1.5 x 0.55mm
Height 0.55mm
Length 1.9mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 1.6 V
Minimum Operating Temperature -40 °C
Width 1.5mm
Available to back order for despatch 15/04/2020
Price Each (On a Reel of 3000)
£ 0.353
(exc. VAT)
£ 0.424
(inc. VAT)
Units
Per unit
Per Reel*
3000 - 3000
£0.353
£1,059.00
6000 - 6000
£0.334
£1,002.00
9000 - 9000
£0.325
£975.00
12000 +
£0.317
£951.00
*price indicative
Related Products
The PNP Bipolar Power Transistor is designed for ...
Description:
The PNP Bipolar Power Transistor is designed for general purpose power amplification and switching such as output or driver stages in applications such as switching regulators, converters and power amplifiers. The MJB44H11 (NPN) and MJB45H11 (PNP) are complementary devices. Low Collector-Emitter Saturation Voltage -VCE(sat) = 1.0 V (Max) @ 8.0 ...