NOA1213CUTAG ON Semiconductor, Photoelectric Sensor Surface Mount 6-Pin

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The NOA1213 is a very low power ambient light sensor (ALS) with an analog current output and a power down mode to conserve power. Designed primarily for handheld device applications, the active power dissipation of this chip is less than 8 A at dark and its quiescent current consumption is less than 200 pA in power down mode. The device can operate over a very wide range of voltages from 2 V to 5.5 V.

Photopic Spectral Response
Senses Ambient Light and Provides an Output Current Proportional to the Ambient Light Intensity
Dynamic Dark Current Compensation
Three Selectable Output Current Gain Modes in Approximately 10x Steps
Power Down Mode
Less than 18 A at 100 lux Active Power Consumption in Medium Gain Mode (Less than 8 A at Dark)
Less than 200 pA Quiescent Power Dissipation in Power Down Mode at All Light Levels
Linear Response Over the Full Operating Range
Senses Intensity of Ambient Light from ∼0 lux to Over 100,000 lux

Specifications
Attribute Value
Typical Rise Time 1.5 (Minimum)ms
Typical Fall Time 300 (Maximum)µs
Number of Pins 6
Mounting Type Surface Mount
Application Automobile Dashboard, Cameras, Cell Phones, Digital Picture Frames, Digital Signage, Displays & Infotainment, GPS, Laptops, LCD TVs & Monitors, LED Indoor/Outdoor Residential & Street Lights, Mobile Devices with Displays or Backlit Keypads, MP3 Players, Notebooks, PDAs, Video Recorders
Dimensions 1.6 x 1.6 x 0.6mm
Height 0.6mm
Length 1.6mm
Maximum Wavelength Detected 590nm
Width 1.6mm
Series NOA1213
Output Signal Type Analogue
Available to back order for despatch 16/10/2019
Price Each (On a Reel of 2500)
£ 0.171
(exc. VAT)
£ 0.205
(inc. VAT)
Units
Per unit
Per Reel*
2500 +
£0.171
£427.50
*price indicative
Related Products
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall element, low-noise amplifier, 13-bit ADC and comparator in a single ...
The ISP815 is an optically coupled isolator. It ...
Description:
The ISP815 is an optically coupled isolator. It consists of a Gallium Arsenide infrared emitting diode and a NPN silicon photo-darlington transistor mounted in a standard 4 pin dual-in-line package. High DC Current transfer ratio (min 600% @IF= 1mA, VCE= 2V)Photo-Darlington Output5000V IsolationCompact dual-in-line package.
The TLP2310 and TLP270 have 54% less power ...
Description:
The TLP2310 and TLP270 have 54% less power consumption than the conventional product .These photocouplers consume a supply current (IDDL/IDDH) of only 0.3 mA maximum over the entire operating temperature range of -40 to 125°C and operate at a supply voltage as low as2.7V,contributing to reducing the power consumption of ...
The FOD8173 series packaged in a stretched body ...
Description:
The FOD8173 series packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and a CMOS detector IC comprises an integrated photodiode, a high speed transimpedance amplifier and a voltage comparator with a totem−pole output driver. The electrical and switching ...