Phoenix Contact Motor Starter

Technical Reference
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

CONTACTRON '4 in 1' Hybrid Motor Starters

The ATEX approved, ELR series of Contractron 4 in 1 hybrid motor starters from Phoenix Contacts give you an alternative to the traditional mechanical contractor circuits.
The highly functional, DIN Rail mounting, reversing starter can be used where a three-phase induction motor needs to be reversed and protected.

Features and Benefits
• ATEX approved
• Combines forward and reverse run, overload protection and emergency contactor in one module
• Adjustable overload shutdown
• Needs little space (only 22.5 mm wide)
• Less wiring time and expense (up to 75% less wiring time compared to conventional contactors)
• Easy DIN rail mounting
• Wear-free fast switching
• Built-in output protection

Standards
EN 60947, EN 50178, IEC 61508, ISO 13849
PTB 07 ATEX 3145

16 In stock for FREE next working day delivery
Price Each
£ 122.59
(exc. VAT)
£ 147.11
(inc. VAT)
Units
Per unit
1 +
£122.59
Related Products
Product width ranging from 22.5mm to 70mm Partial ...
Description:
Product width ranging from 22.5mm to 70mm Partial load failure detection Zero cross switching Ratings up to 660VACrms & 85AACrms @ 40°CUp to 18000A2s for I2t and 1200Vp for blocking voltage Control voltage range: 4 - 32 VDCLocal or remote current set-point LED indications for the different faults Alarm signal ...
These relays are designed to start and reverse ...
Description:
These relays are designed to start and reverse the rotation direction of three-phase motors.They have input/output line isolation with opto-couplers, with very high immunity to difficult environments, dV/dT, humidity, and combustible atmospheres.Status display.Applications, conveyor belts, packaging machines, crane girders, etc.
With forcibly guided contacts Contact opening >0.5 mm ...
Description:
With forcibly guided contacts Contact opening >0.5 mm throughout its service life, including malfunctions and @ 1.6 UNAir gap and creep distance, surface winding ≥8 mm High dielectric withstand voltage ≥4 k VLarge voltage range 0.7 → 1.6 UNAs per IEC 664/VDE 0110 (1 / 89): Rated voltage: 250 V, ...
Current relay with soft start to allow consumption ...
Description:
Current relay with soft start to allow consumption and low-frequency interference to be reduced.Sector diagnostic:  frequency value, phase, presence and rotation, cabling in star or triangle.Output diagnostic (motor):  speed and cabling.Status display with 3 colour LEDs.Multiple control possibilities:  PNP, NPN, dry contact (e.g.,  compressor with pressure switch).Part number SMCW6080 is a model with heat ...