Electrolube ER2074, 250 g White Bag Epoxy Adhesive

  • RS Stock No. 160-8469
  • Mfr. Part No. ER2074RP250GR
  • Brand Electrolube
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Casting Compound, Epoxy Resin ER 2074, ER 2183

Casting compound for encapsulating electronic assembliesVibration isolation and prevention of stress exposureER 2074 RS stock no. 160-8469very high thermal transfer properties (thermal conductivity of 1.26W/mK)Entirely free of grinding fillersLow heat emission upon hardeningAt a storage or transport temperature below 10 °C, the product may contain small clots as a result of crystallisation, which impedes its use with dispensing systems. Upon heating to max. 50 °C, crystals dissolve againER 2183 RS stock no. 337-5919high thermal transfer properties, oil-resistant

Electrolube Epoxy Resin

The Electrolube 250g epoxy resin is a flame retardant, thermally conductive, 2-part potting and encapsulating compound. This technology used is of the ’clean’ type, leading to relatively low toxicity fumes and low smoke emission.

Features and Benefits

Very high thermal properties
• Entirely free of grinding fillers
• Low heat emission upon hardening
• High thermal conductivity ideal for heat dissipation within LED applications
• Good environmental protection
resistant to water and chemical
• Does not contain abrasive fillers
low wear on dispensing machinery
• Setting time is 5 hours
• Cure time at 23°C is 24 hours
• Shelf life of 24 Months
• Flame retardant
• The operating temperature ranges between -40°C and 130°C


• LEDs

• Rubber
• Plastic
• Glass

Potting Compounds: Twin Packs

Attribute Value
Adhesive Type Epoxy Adhesive
Trade Name ER2074
Colour White
Package Type Bag
Package Size 250 g
Cure Time 1 hrs °C@ 100, 4 hrs °C@ 60, 24 hrs °C@ 25
Maximum Operating Temperature +130°C
Minimum Operating Temperature -40°C
Setting Time 5h
Operating Temperature Range -40 → +130 °C
Available to back order for despatch 05/11/2020
Price Each
£ 13.88
(exc. VAT)
£ 16.66
(inc. VAT)
Per unit
1 - 5
6 - 14
15 +
Related Products
The required amount of putty is torn from ...
The required amount of putty is torn from the strip and kneaded by hand until the blue and white strip has turned a uniform colour. Gel time 6 minutes at +20°CWill bond and seal a wide variety of materials Can be used to fill cracks and holes Can be moulded ...
TPM550 features high thermal conductivity of 5.5 W/m.K ...
TPM550 features high thermal conductivity of 5.5 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of defined interfaces. TPM550 can be reworked and its lower specific ...
Gorilla Epoxy delivers a strong, long-lasting bond to ...
Gorilla Epoxy delivers a strong, long-lasting bond to both household and automotive repairs. The easy-to-use syringe dispenses an equal amount of resin and hardener, that when mixed together creates a permanent, durable and water resistant bond.The two-part, gap-filling Gorilla Epoxy formula sets in 5 minutes and easily bonds steel, aluminium, ...
The Araldite 2Kg epoxy resins is a pale ...
The Araldite 2Kg epoxy resins is a pale yellow dual cartridge, multi-purpose glue, ideal for large areas of bonding and/or long working time applications. This can be used for ferrous and non-ferrous metals, polyamides, polystyrene foams, PU foams, ceramics and wood. Cure time of 36 Hours at room temperature Operating ...