Texas Instruments SCANSTA111MT/NOPB, 7-Bit Addressable Scan Port, 3 → 3.6 V, 48-Pin TSSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Addressable JTAG Port, Texas Instruments

The Texas Instruments SCANSTA111 extends the IEEE Std. 1149.1 test bus into a multi-drop test bus environment with the advantages of improved test throughput, and the ability to remove a board from the system whilst retaining test access to the remaining system modules. Each device supports up to three local IEEE 1149.1 scan rings which can be serially combined or accessed individually. A 32-bit TCK counter enables built-in self-test operations to be performed on one port while other scan chains are simultaneously tested.

The IEEE 1149.1 standard test access port and boundary-scan architecture uses devices known by the JTAG acronym, from Joint Test Action Group, and is used for testing and debugging system ports and PCB assemblies. Most embedded systems employ JTAG ports to enable in-circuit debugging and firmware programming, in addition to boundary scan testing.

Specifications
Attribute Value
Number of Element Inputs 7
Number of Elements per Chip 1
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 48
Dimensions 12.6 x 6.2 x 1.05mm
Length 12.6mm
Width 6.2mm
Height 1.05mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
Operating Temperature Range -40 → +85 °C
Operating Supply Voltage Range 3 → 3.6 V
Price Each (In a Tube of 38)
£ 7.826
(exc. VAT)
£ 9.391
(inc. VAT)
Units
Per unit
Per Tube*
38 - 152
£7.826
£297.388
190 +
£7.669
£291.422
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
A Texas Instruments evaluation module allowing design engineers ...
Description:
A Texas Instruments evaluation module allowing design engineers to assess the performance of the TPS3700 high voltage window comparator for over- and under-voltage detection. This supervisory application features wide supply voltage range, very low quiescent current and high accuracy with two independent open-drain outputs. Headers on the PCB permit easy ...
Texas Instruments range of Bus Transceivers from the ...
Description:
Texas Instruments range of Bus Transceivers from the 74LVC Family of Low-voltage CMOS Logic ICs. The 74LVC Family use silicon gate CMOS technology and is designed to operate at 3.3V, allowing a significant reduction in power consumption when compared to 5V systems. Operating Voltage: 1.65 to 3.6V5V tolerant inputs Compatibility: ...
The easy-to-use inductorless Charge Pump ICs from Texas ...
Description:
The easy-to-use inductorless Charge Pump ICs from Texas Instruments offer a small-sized, simpler solution with high performance. The charge pump or switched-capacitor converter is an alternative solution to inductive DC-DC converters and delivers higher efficiency than Low Dropout (LDO) regulators. Buck (Step-Down), Boost (Step-Up) and Inverting topologies.
The easy-to-use inductorless Charge Pump ICs from Texas ...
Description:
The easy-to-use inductorless Charge Pump ICs from Texas Instruments offer a small-sized, simpler solution with high performance. The charge pump or switched-capacitor converter is an alternative solution to inductive DC-DC converters and delivers higher efficiency than Low Dropout (LDO) regulators. Buck (Step-Down), Boost (Step-Up) and Inverting topologies.