Ingersoll Rand Access Control Door Strike A5/12, Fail Secure, 12V dc, 250mA, 28 mm
- RS Stock No.:
- 626-573
- Mfr. Part No.:
- A5/12
- Brand:
- Ingersoll Rand
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 626-573
- Mfr. Part No.:
- A5/12
- Brand:
- Ingersoll Rand
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
Standard Door Strikes
High quality, continuously-rated door strike mechanisms, suitable for frame or surface mounting (when used with the surface mounting plate).
Serve as a replacement for the existing strike plate and can be used with most self-latching type door mechanisms.
A suitable power supply unit is required for both units when used in conjunction with the card lock system.
The fail locked (fail secure) unit also requires a power supply when used with the programmable access control systems.
Standard lock current consumption 250mA typ. 12V types, 125mA typ. 24V types.
Serve as a replacement for the existing strike plate and can be used with most self-latching type door mechanisms.
A suitable power supply unit is required for both units when used in conjunction with the card lock system.
The fail locked (fail secure) unit also requires a power supply when used with the programmable access control systems.
Standard lock current consumption 250mA typ. 12V types, 125mA typ. 24V types.
Door Mechanism and Lock Compatibility
The following table displays the compatibility of the door mechanisms with the locks available from RS.
Note
Standard strike mechanisms are not suitable for mortice-type dead locks as the bolts in this type of lock are not spring loaded and will not relock successfully.
Specifications
Attribute | Value |
|---|---|
| AC or DC Operation | DC |
| Current Consumption | 250mA |
| Depth | 28 mm |
| Failure Mode | Fail Secure |
| Height | 150 mm |
| Supply Voltage | 12V dc |
| Width | 25mm |