RS PRO Single Door Access Control Door Magnet, 1200lb, 12 V dc, 24 V dc

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

RS Standard Magnets

Operating voltage: 12 or 24Vdc
Aluminium
Current draw: 500mA at 12Vdc
250mA at 24Vdc (at temperature 20 °C)
(SPDT rated 3A at 12Vdc)
Status LED lights
Operating temperature: -10 to 55 °C (14 to 131 °F)
Humidity: 0 to 95% non-condensing
Lock’s surface temperature: Current temperature +/-20% (when power is on)
Holding force: Up to 1200lbs (545kg)
Weight: 5kg

Specifications
Attribute Value
Holding Force 1200lb
Door Type Single Door
Supply Voltage 12 V dc, 24 V dc
Depth 40 mm
Height 68 mm
Width 266mm
Available to back order for despatch when stock is available
Price Each
£ 101.31
(exc. VAT)
£ 121.57
(inc. VAT)
Units
Per unit
1 +
£101.31
Related Products
Electrical current is required to turn the magnet ...
Description:
Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF. Free leads, two-pole connector, Hirschman connector Threaded hole/s in rear face of magnet Bright nickel plated with machined face.
Low power consumption components designed to hold a ...
Description:
Low power consumption components designed to hold a device in a specific position and to free this device using a simple electrical signal.Operation:- holding: the metal object is held in place on contact with the electromagnet, which is fitted on a fixed element.- release: ''no voltage'' models - the metal ...
Low power consumption components designed to hold a ...
Description:
Low power consumption components designed to hold a device in a specific position and to free this device using a simple electrical signal.Operation:- holding: the metal object is held in place on contact with the electromagnet, which is fitted on a fixed element.- release: ''no voltage'' models - the metal ...
These devices are designed for supporting or gripping ...
Description:
These devices are designed for supporting or gripping ferromagnetic parts.The maximum retaining force is obtained by contact with flat mild steel parts, with a surface area equal to or greater than the attraction surface, and with a sufficient thickness (equal to at least 1/8th of the diameter ofthe electromagnet).Any gap, ...