Lathe Tool Holders

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost.

Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.

What are the advantages of lathe tool holders?
Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement.
They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring loaded to deflect the tool if too much force is applied.

Uses of lathe tool holders
There are several additional ways in which lathe tool holders allow greater range of use of tool bits.

  • They can change the angle of the tool bit.
  • They can change the level of overhang in the tool bit.
  • They can direct fluid to the work area.
  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 1 - 16 of 16 products
Results per page
Description Price Approach Angle Series For Use With Priced to Clear
RS Stock No. 866-0363
Mfr. Part No.XLCFN 3201 M 2.00
BrandPramet
£104.51
Each
Units
- XLCFN LFMX 2.00...Insert, LFMX 2.20...Insert -
RS Stock No. 866-0332
Mfr. Part No.S16M-SCLCR 09-A
BrandPramet
£131.64
Each
Units
95° SCLCR/L CC.. 09T3..Insert -
RS Stock No. 866-0354
Mfr. Part No.XLCFN 2601 J 2.00
BrandPramet
£100.31
Each
Units
- XLCFN LFMX 2.00...Insert, LFMX 2.20...Insert -
RS Stock No. 866-0335
Mfr. Part No.SDJCR 1616 H 11
BrandPramet
£101.14
Each
Units
93° SDJCR/L DC.. 11T3..Insert -
RS Stock No. 866-0408
Mfr. Part No.PWLNR 2525 M 0604
BrandPramet
£109.95
Each
Units
95° PWLNR/L WNM. 0604.. Insert -
RS Stock No. 866-0350
Mfr. Part No.32-DU 2532
BrandPramet
£224.60
Each
Units
- DU, D XLC.N 32..Blade -
RS Stock No. 866-0556
Mfr. Part No.A08H-SCLCR 06
BrandPramet
£123.93
Each
Units
95° SCLCR/L CC.. 0602..Insert -
RS Stock No. 866-0562
Mfr. Part No.MTJNR 2020 K 16
BrandPramet
£103.71
Each
Units
93° MTJNR/L TN.. 1604..Insert -
RS Stock No. 866-0401
Mfr. Part No.A20Q-PWLNR 0604
BrandPramet
£169.89
Each
Units
95° PWLNR/L WN.. 0804..Insert -
RS Stock No. 866-0398
Mfr. Part No.PWLNR 2020 K 0604
BrandPramet
£104.26
Each
Units
95° PWLNR/L WNM. 0604.. Insert -
RS Stock No. 866-0341
Mfr. Part No.A20Q-SDQCR 11
BrandPramet
£162.93
Each
Units
107°30' SDQCR/L DC.. 11T3..Insert -
RS Stock No. 866-0552
Mfr. Part No.DCLNR 2525 M 12
BrandPramet
£109.95
Each
Units
95° DCLNR/L CN.. 1204..Insert -
RS Stock No. 866-0338
Mfr. Part No.DTGNR 2020 K 16
BrandPramet
£104.26
Each
Units
90° DTGNR/L TN.. 1604..Insert -
RS Stock No. 866-0565
Mfr. Part No.26-DU 2020
BrandPramet
£208.83
Each
Units
- DU, D XLC.N 26..Blade -
RS Stock No. 866-0405
Mfr. Part No.S25T-PWLNR 0604
BrandPramet
£288.71
Each
Units
95° PWLNR/L WNM. 0604..Insert Yes
RS Stock No. 866-0641
Mfr. Part No.S20Q-CTFPR 11
BrandPramet
£139.67
Each
Units
91° S-CTFPR/L CT Inserts -
Related Products
For use with DDJN, PDJN, PDNN, PDXN and ...
Description:
For use with DDJN, PDJN, PDNN, PDXN and PDUN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
For use with SDJC, SDNCN, SDQC, SDUC, SDZC ...
Description:
For use with SDJC, SDNCN, SDQC, SDUC, SDZC Holders & Bars. Excellent for machining Steel, Stainless Steel and Cast IronAcceptable for Super AlloysPositive Angle.
TNMG Negative Turning Insert for use with DTGN, ...
Description:
TNMG Negative Turning Insert for use with DTGN, DTFN, PTFN, PTGN, PTTN, PTFN and MTJN Holders and Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
This shank cutter set is for chamfering holes ...
Description:
This shank cutter set is for chamfering holes or component profiles, suitable for a wide range of materials. Containing holder and 10 TCMT inserts providing 3 cutting edges for improved economy. Capable of chamfering holes in one action from 11 mm to 31 mm in diameter. • Shank Cutters for ...