Heat Guns

Heat Guns are a hand held tool that uses a stream of hot air which is heated by a built-in element at temperatures between 100°C and 550°C. Heavy duty heat guns operate at hotter temperatures of plus 700°C. Heat Guns allow you to concentrate the heat onto a targeted area or surface also give you control using the on and off trigger. If you need advice on how to use these tools, you can consult our Heat Guns Guide.How A Heat Gun Works:The heat used by the Heat Gun is produced by a fan built into the back of the gun within the gun which draws air in and then passes the cold air over the heating elements which then creates the required stream of hot air.How To Use A Heat Gun:Heat Guns should be held at an angle of 45° from the area you target but never hold the stream of heated air in one place for more than a few seconds as you could damage and burn your work surface. When stripping paint from a surface use the Heat Gun to soften the paint until it bubbles and blisters. Remove the Heat Gin from the surface then use a scraping tool to remove the paint from the work surface.Uses for Heat Guns:
  • Stripping Paint including lead paint (lead paint, use temperatures below 590° minimising vaporisation)
  • Heat Shrink Tubing
  • Shrink Film
  • Shrink Wrap Packaging
  • Wood - helps to dry out damp wood
  • Plastic – assists help in welding, bending and shaping plastic
  • Adhesive softening
  • Thawing frozen pipes
  • Electronics – De-soldering
  • Rework surface-mounted circuit boards

...
Read more Read less

Filters

Viewing 21 - 30 of 30 products
Results per page
Description Price Maximum Airflow Wattage Voltage Rating Maximum Operating Temperature Plug Type Outlet Diameter Weight Model Number
New
RS Stock No. 193-2030
Mfr. Part No.HG6531CK-D
BrandMakita
£135.40
Each
Units
200 → 550 L/min 2 kW 240 V +650 °C EU - 710 g -
RS Stock No. 187-8995
Mfr. Part No.HG2320ESD 240V
BrandSteinel
£202.50
Each
Units
500L/min 2.3kW 240V +650°C Type G - British 33mm 753g 65157
RS Stock No. 187-8996
Mfr. Part No.HG2320ESD 230V
BrandSteinel
£202.50
Each
Units
500L/min 2.3kW 230V +650°C Type C - EuroPlug 33mm 753g 20811
RS Stock No. 175-0637
Mfr. Part No.GHG 20-60
BrandBosch
£131.03
Each
Units
500L/min 2kW 230V +630°C Type C - EuroPlug - 600g GHG 20-60
RS Stock No. 175-7106
Mfr. Part No.06032A6070
BrandBosch
£30.96
Each
Units
450L/min 1.6kW 230V +500°C Type G - British - 470g EasyHeat 500
RS Stock No. 181-6799
Mfr. Part No.06012A6370
BrandBosch
£140.00
Each
Units
150 → 300/150 → 500L/min 2.3kW 230V +650°C Type G - British - 670g GHG 23-66
RS Stock No. 188-3888
Mfr. Part No.E.2015
BrandFacom
£137.51
Each
Units
250 (Mode1) L/min, 500 (Mode2) L/min 2000W 220 → 240V +600°C Type C - EuroPlug 72mm 980g E.2015
RS Stock No. 175-7105
Mfr. Part No.06032A6170
BrandBosch
£38.25
Each
Units
500L/min 1.8kW 230V +600°C Type G - British - 530g Universal Heat 600
RS Stock No. 181-6798
Mfr. Part No.06012A6360
BrandBosch
£140.00
Each
Units
150 → 300/150 → 500L/min 1.4kW 110V +650°C BS 4343 - 670g GHG 23-66
RS Stock No. 146-8764
Mfr. Part No.SLS.GKIT1-GUN
BrandFacom
£552.23
Each
Units
- - - - - - - SLS.G
Related Products
Quickly transforms a quick-release coupling into a safety ...
Description:
Quickly transforms a quick-release coupling into a safety blowgun Direct connection to all 6-mm diameter Stäubli compressed air quick-release couplings for fast, easy incorporation into your installation.Coupling acts as blowgun handle.Practical Blowgun can easily be hung on the parking bracket, which incorporates a break-away function, using the ring or lever.Robust ...
Smart Heat Power on Demand Technology Patented Connection ...
Description:
Smart Heat Power on Demand Technology Patented Connection Validation IMC Formation Technology2.8” colour touchscreen with bold graphics Communications Port for process traceability data and firmware graphics Precise tip temperature display Integrated Net Power Meter and power graph Patented Chip-in-Cartridge technology Closed loop bi-directional communication Stores and records cartridge attributes Provides ...
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputs SMT/De-soldering/Rework station, allowing quick removal and replacing of components Requires 60-100psi air supply40W rating at 22°C (72°F) ambient Operating temperature range 10°C to 40°C (50°F to 104°F)Maximum enclosure temperature ...
Electric fastener for staples and brad nails. Ergonomic ...
Description:
Electric fastener for staples and brad nails. Ergonomic soft grip handle for comfort Accepts heavy duty staples up to 14mm and brads up to 15mm Easy access staple & brad insertion for quick loading Hi/Lo adjustment for wide range of applications Extra long cord for ease of use.