Test Probe Accessories

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 909-8047
Mfr. Part No.619361-1
£76.16
Each
Units
Coaxial Switch Connector Pico Coax Switches
RS Stock No. 161-3705
Mfr. Part No.S1751-46
BrandHARWIN
£0.154
Each (In a Pack of 50)
Units
Test Point Standard Test Probe, Test Lead Clips and Hooks
RS Stock No. 161-3604
Mfr. Part No.S1751-46
BrandHARWIN
£96.25
1 Pack of 1000
Pack(s)
Test Point Standard Test Probe, Test Lead Clips and Hooks
Related Products
Clamp-type test probe with rotating gripper and flexible ...
Description:
Clamp-type test probe with rotating gripper and flexible shaft. The gripper has been specially shaped so that pins and wires up to a maximum diameter of 4mm can be connected without slipping off. Suited for cable sizes 0.25 mm2 to 1.5mm2. Maximum outer cable diameter 4mm. Meets requirements of IEC ...
Micro test clip that accepts a 0.64mm socket ...
Description:
Micro test clip that accepts a 0.64mm socket (stock-no. 775-754 for adaptor leads).,The clip features a rotating clip jaw with an extremely thin shaft that can be bent to 35° to reach awkward test points.,Suitable for SMD components and packed contact points (1.27mm IC pitch).
Safety system clamp-type test probe with two-part test ...
Description:
Safety system clamp-type test probe with two-part test clamp The sprung stainless steel tip can contact insulated cables from 0.25 → 1.5 mm2 (Ø 3.5 mm) without the need for stripping Socket connector made from brass Voltage rating: AC/DC 1000 VCurrent rating: 10 ATemperature range: -25 °C → +80 °C ...
A flexible probe with cross-over grip jaws that ...
Description:
A flexible probe with cross-over grip jaws that allow pins and wires up to a maximum diameter of 4mm to be clamped.,Connection is by means of a 4mm touch protected socket that will accept 4mm plugs with a retractable shroud (e.g. stock nos. 737-932 & 737-954).