Linear Scales

Linear scales are used to obtain accurate measurement of distance, mass and volume. A wide variety of measuring ranges are available.

Linear scales offer
● Sturdy construction
● High resistance to vibration
● Protection rating are similar in upright and reclining position

● Linear scales are highly resistant to environmental disturbances. Electromagnetic induction principle means scales are unaffected by contamination. Suitable for milling machines, drilling machines, XY tables etc.

Features include
● Enhanced vibration-resistance and durability
● The innovative rubber lips keep out contaminants when you are using the scale in a machine shop
● An armoured signal cable is used to connect the scale unit to the DRO counter, so you can operate it safely even in hostile environments
● The signal cable outlet can be positioned on either side of the slider so you can connect the signal cable from either direction

The Linear Scale System has superior ease-of-use and is reliable, both of which are features that can dramatically improve machining accuracy and efficiency.

...
Read more Read less

Filters

Viewing 1 - 3 of 3 products
Results per page
Description Price Accuracy Cable Length IP Rating Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 795-9912
Mfr. Part No.539-802
BrandMitutoyo
£339.28
Each
Units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9930
Mfr. Part No.539-807
BrandMitutoyo
£397.77
Each
Units
±5 μm 3.5m IP67 +45°C 0°C
RS Stock No. 795-9924
Mfr. Part No.539-804
BrandMitutoyo
£350.03
Each
Units
±5 μm 3.5m IP67 +45°C 0°C
Related Products
The Mitutoyo 0 to 8in digital precision calliper ...
Description:
The Mitutoyo 0 to 8in digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. ...
Metric and imperial reading Scale division 0.02mm and ...
Description:
Metric and imperial reading Scale division 0.02mm and 0.001in Dial rotates for zero adjustment Fine adjustment thumbwheel.
A dial caliper manufactured from hardened stainless steel ...
Description:
A dial caliper manufactured from hardened stainless steel The dial rotates for zero adjustment and can be locked in position The scale has 0.02mm division1 pointer revolution = 2mmA thumbwheel offers ease of operation, a knurled lockscrew locks jaws if required.
Professional range of digital scales with horizontally oriented ...
Description:
Professional range of digital scales with horizontally oriented display. IP66 protected.Auto Power OFF after 20 minutes. (non use).SPC data output.