Loop Impedance Testers

What is loop testing?
Loop testing is a quick, convenient and highly specific method of evaluating an electrical circuit for its ability to engage protective devices (circuit breakers, fuses, Ground-fault circuit interrupter).
There are 5 test methods:
• two-wire high-current
• two-wire no-trip with dc injection
• three-wire no-trip
• two-wire no-trip
• four-wire grid impedance testing

The main reason for earth loop impedance testing, is to verify that if a fault occurs in an electrical installation, sufficient current will flow to operate the fuse or circuit breaker protecting the faulty circuit within a predetermined time. The objective is to make sure that the circuit is disconnected fast enough to prevent overheating and possibly a fire.

...
Read more Read less

Filters

Viewing 1 - 9 of 9 products
Results per page
Description Price Loop Impedance Test Type Calibrated Maximum Voltage Measurement Best Loop Test Accuracy Resolution PSC Display Non-Trip Loop Test Safety Category Battery Type Battery Life Power Source Dimensions Weight Height
RS Stock No. 123-2239
BrandRS PRO
£130.90
Each
Units
3 Wire - - ±2% 0.01 Ω Yes - - - - Mains 180 x 130 x 70mm 800g 70mm
RS Stock No. 123-2348
BrandRS PRO
£179.90
Each
Units
3 Wire RSCAL - ±2% 0.01 Ω Yes - - - - Mains 180 x 130 x 70mm 800g 70mm
RS Stock No. 123-2349
BrandRS PRO
£199.90
Each
Units
3 Wire UKAS - ±2% 0.01 Ω Yes - - - - Mains 180 x 130 x 70mm 800g 70mm
RS Stock No. 237-899
Mfr. Part No.LTW315-RS-BS
BrandMegger
£564.00
Each
Units
2 Wire, 3 Wire UKAS 440V ±10% - - Yes CAT IV 300 V, IEC 61010 AA 2000 Tests Battery 203 x 148 x 78mm 1kg 78mm
RS Stock No. 198-435
Mfr. Part No.LTW315-EU-BS
BrandMegger
£495.00
Each
Units
2 Wire, 3 Wire - 440V ±10% - - Yes CAT IV 300 V, IEC 61010 AA 2000 Tests Battery 203 x 148 x 78mm 1kg 78mm
RS Stock No. 237-861
Mfr. Part No.LTW315-RS-BS
BrandMegger
£544.00
Each
Units
2 Wire, 3 Wire RSCAL 440V ±10% - - Yes CAT IV 300 V, IEC 61010 AA 2000 Tests Battery 203 x 148 x 78mm 1kg 78mm
RS Stock No. 536-9219
Mfr. Part No.LT300
BrandMegger
£509.00
Each
Units
2 Wire RSCAL 550V ±5% 0.1 Ω - - CAT IV 300 V AA - Battery 203 x 148 x 78mm 980g 78mm
RS Stock No. 528-6681
Mfr. Part No.LT300-EN-BS
BrandMegger
£460.00
Each
Units
2 Wire - 550V ±5% 0.1 Ω - - CAT IV 300 V AA - Battery 203 x 148 x 78mm 980g 78mm
RS Stock No. 537-4621
Mfr. Part No.LT300
BrandMegger
£529.00
Each
Units
2 Wire UKAS 550V ±5% 0.1 Ω - - CAT IV 300 V AA - Battery 203 x 148 x 78mm 980g 78mm
Related Products
Flexible cordsets are widely used in industrial automation ...
Description:
Flexible cordsets are widely used in industrial automation and factory floor applications. The M12 connector provides a compact size that enables cleaner cable management. These M12 cordsets from Alpha Wire can handle flexible applications up to 5 million flex life cycles. Alpha Wire M12 connector cordsets are available in 300 ...
Earth loop impedance testers to verify the loop ...
Description:
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range ...
The Megger insulation tester lead is a set ...
Description:
The Megger insulation tester lead is a set of two leads used for BM100 insulation and continuity tester. This tester is used as a replacement or spare test lead set. These leads have 4mm connector and can be used with a range of multimeters, clamp meters, insulation testers, multifunction testers ...
Schaffner's FN2070 two-stage filters are designed for easy ...
Description:
Schaffner's FN2070 two-stage filters are designed for easy and fast chassis mounting. All filters provide a high conducted attenuation performance based on chokes with high saturation resistance and excellent thermal behaviour.Can be used in a wide range of applications such as electrical and electronic equipment, building automation, industrial applications, machinery, ...