Bench Power Supplies

A bench power supply is an essential piece of equipment if you do a lot of electronics or other powered projects on your bench and need a reliable source of power at different voltages. They are very useful tools in testing circuits, as they allow you to adjust the voltage to a specific value depending on what project you are working on. A variable DC bench power supply also allows you to set a maximum current, so if there is a short circuit in your project the bench supply will shut down hopefully preventing any harm to some components in your project. Bench power supplies are versatile, accurate and stable and don’t cost too much.

When it comes to power you have 4 units to be aware of, Current, Voltage, Power and Resistance. It’s very important that if you are supplying your circuit with some voltage, your supply can keep up with the current drawn.

There are two basic types of power supplies in common use: linear and switch-mode. Both are available for use as bench DC power supplies.

Linear power supplies operate by rectifying AC line power to create DC, and then filtering and regulating it to produce user-selectable voltage or current levels. Linear supplies are heavier because the 50 Hz or 60 Hz transformer and associated filters are physically larger.
Switch-mode power supplies start out the same way, rectifying and filtering AC line input voltage, however they chop (or "switch") the DC into high-frequency AC. Switch-mode power supplies are significantly smaller, lighter and more efficient than linear power supplies, so they have replaced linear supplies in many applications.

Areas of application:
● General laboratory
● Education
● Industry
● Research
● Production
● Workshops

...
Read more Read less

Filters

Viewing 1 - 20 of 1254 products
Results per page
Description Price Output Voltage Model Number Output Current Number of Outputs Type Power Rating Supply Voltage Number of Displays Input Connector Output Connector Calibrated Minimum Temperature Maximum Temperature Priced to Clear
RS Stock No. 123-6636
BrandRS PRO
£354.00
Each
Units
2 x 0 → 32 V, 2.5 → 5 V - 3.2A 3 Programmable Linear Power Supply 220W 230V ac 2 CEE 7/7 German Schuko / French LAN, USB UKAS 0°C +40°C -
RS Stock No. 123-6467
BrandRS PRO
£285.00
Each
Units
0 → 32V - 3.2A 3 Programmable Linear Power Supply 220W 230V ac 2 IEC 320 Binding Post Terminal - 0°C +40°C -
RS Stock No. 123-6635
BrandRS PRO
£334.00
Each
Units
2 x 0 → 32 V, 2.5 → 5 V - 3.2A 3 Programmable Linear Power Supply 220W 230V ac 2 CEE 7/7 German Schuko / French LAN, USB RSCAL 0°C +40°C -
RS Stock No. 123-3612
BrandRS PRO
£304.00
Each
Units
2 x 0 → 30V - 2 x 0 → 3A 2 Digital 180W 100 → 230V ac 4 - Plug-In Terminal Block RSCAL 0°C +40°C -
RS Stock No. 123-3565
BrandRS PRO
£255.00
Each
Units
0 → 30V - 3A 2 Digital 180W 100 → 230V ac 4 IEC 320 Plug-In Terminal Block - 0°C +40°C -
RS Stock No. 123-3613
BrandRS PRO
£324.00
Each
Units
2 x 0 → 30V - 2 x 0 → 3A 2 Digital 180W 100 → 230V ac 4 - Plug-In Terminal Block UKAS 0°C +40°C -
RS Stock No. 123-6488
BrandRS PRO
£614.00
Each
Units
2 x 0 → 32 V, 2.5 → 5 V - 3.2A 3 Programmable Linear Power Supply 220W 230V ac 2 CEE 7/7 German Schuko / French LAN, USB RSCAL 0°C +40°C -
RS Stock No. 123-6489
BrandRS PRO
£634.00
Each
Units
2 x 0 → 32 V, 2.5 → 5 V - 3.2A 3 Programmable Linear Power Supply 220W 230V ac 2 CEE 7/7 German Schuko / French LAN, USB UKAS 0°C +40°C -
RS Stock No. 123-6469
BrandRS PRO
£565.00
Each
Units
0 → 32V - 3.2A 3 Programmable Linear Power Supply 220W 230V ac 2 IEC 320 Binding Post Terminal - 0°C +40°C -
RS Stock No. 123-3597
BrandRS PRO
£228.47
Each
Units
0 → 30V dc - 0 → 3A 1 Analogue 90W 100 → 240V ac 2 - Plug-In Terminal Block UKAS 0°C +40°C -
RS Stock No. 123-3563
BrandRS PRO
£159.47
Each
Units
0 → 30V - 3A 1 Analogue 90W 100 → 240V ac 2 IEC 320 Plug-In Terminal Block - 0°C +40°C -
RS Stock No. 123-3596
BrandRS PRO
£208.47
Each
Units
0 → 30V dc - 0 → 3A 1 Analogue 90W 100 → 240V ac 2 - Plug-In Terminal Block RSCAL 0°C +40°C -
RS Stock No. 123-3603
BrandRS PRO
£241.00
Each
Units
0 → 30V dc - 0 → 3A 1 Digital 90W 100 → 240V ac 2 - Plug-In Terminal Block RSCAL 0°C +40°C -
RS Stock No. 123-3564
BrandRS PRO
£192.00
Each
Units
0 → 30V - 3A 1 Digital 90W 100 → 240V ac 2 IEC 320 Plug-In Terminal Block - 0°C +40°C -
RS Stock No. 123-3604
BrandRS PRO
£261.00
Each
Units
0 → 30V dc - 0 → 3A 1 Digital 90W 100 → 240V ac 2 - Plug-In Terminal Block UKAS 0°C +40°C -
RS Stock No. 123-3578
BrandRS PRO
£349.00
Each
Units
0 → 36V - 10A 1 Digital 360W 115 V ac, 230 V ac 2 IEC 320 Plug-In Terminal Block - 0°C +40°C -
RS Stock No. 123-3827
BrandRS PRO
£398.00
Each
Units
0 → 36V dc - 0 → 10A 1 Digital 360W 115 (±10 %) V ac, 230 (±15 %) V ac 2 - Plug-In Terminal Block RSCAL 0°C +40°C -
RS Stock No. 123-3828
BrandRS PRO
£418.00
Each
Units
0 → 36V dc - 0 → 10A 1 Digital 360W 115 (±10 %) V ac, 230 (±15 %) V ac 2 - Plug-In Terminal Block UKAS 0°C +40°C -
RS Stock No. 138-0490
BrandRS PRO
£418.00
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 138-0489
BrandRS PRO
£398.00
Each
Units
- - - - - - - - - - - - - -
Related Products
B&K Precision model 1739 low current high resolution ...
Description:
B&K Precision model 1739 low current high resolution DC power supply has excellent load regulation and low noise characteristics. Two 4-digit LED displays continuously monitor the output voltage and current. The power supplies can be operated locally from the front panel or remotely through the RS-232 interface. The mechanical configuration ...
Introducing the RS PRO IPS Series DC Power ...
Description:
Introducing the RS PRO IPS Series DC Power Supply. This Bench Power Supply has a programmable switch-mode and a multi-range feature for flexible and efficient configuration of voltage and current within the rated power range. These benchtop power supplies can be connected in series (maximum two units) or in parallel ...
One, two or three channels – R&S®HMC804x power ...
Description:
One, two or three channels – R&S®HMC804x power supplies with their specifications and wide range of functions are ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the linear power supplies remain cool and quiet, even at maximum load.Practical interfaces and connectors allow users ...
The Rohde & Schwarz HMP series Hameg 188W ...
Description:
The Rohde & Schwarz HMP series Hameg 188W bench power supply has two-channels, an output voltage rating of 32V and first channel output current rating of 10A, second channel output current rating of 5A. These rugged instruments are ideal for a wide variety of requirements from educational to industrial applications. ...