Counter ICs

A Shift Register is a sequential logic device made up of a cascade of flip-flops, through which a sequence of bits are shifted. These devices are commonly used to convert between serial and parallel interfaces.How it works – basic exampleIn a Shift Register the output of each flip-flop is connected to the input of the next flip-flop in the cascade. With each cycle of the connected clock, the bits are shifted down the cascade by one flip-flop.A simple analogy to understand the basic theory or operation would be to consider a glass tube with an opening both ends, and placing a ball marked 0 or 1 into one end of the tube at a regular intervals.As each ball is placed into the tube, all the balls are shifted along by one position. The sequence in which the balls marked 0 and 1 where fed in is preserved. Also each time one ball is fed in, the ball that has been in the cascade the longest drops out. So if the tube can contain 4 balls at any one time, this could be described as a 4-bit Shift Register.Common Types of Shift Register Serial-in serial-out (SISO) – In this type of Shift Register, the data input and output is serial. With each clock cycle a new bit is fed into the cascade, with the bit furthest along the cascade exiting as an output. So in a 4-bit register, the output trails the input by 4 clock cycles. This matches the simple example above, with the ball that exits the tube being the output. Serial-in parallel-out (SIPO) – In this configuration data is converted from serial into parallel format. As described for the SISO variant above, data is fed in serially and shifted down the cascade, the difference is that each flip-flop has an output, allowing the entire bit array to be output simultaneously as a parallel output. This may be done using a latched of buffered output. Parallel-in serial-out (PISO) – This variant takes a parallel input and converts into a serial output. To do this the shift register must implement a write/shift sequence. The parallel data input is (written) into each flip-flop of the array simultaneously in one clock cycle, then for the next cycles the register goes into shift mode as the bits are shifted down the flip-flop cascade, being output as serial data. The process then repeats. Parallel-in parallel-out (PIPO) – This type of register differs slightly from the others in that inputs and outputs of each flip-flop in the array are not interconnected. Each flip-flop takes one bit of the parallel input, stores it for a cycle, and then outputs the data simultaneously with the other flip-flops in the register, creating a parallel output that matches the input. Like the SISO type above, PIPO variants can be used to temporarily store data, or act a time delay device. Universal Shift Register – A configurable Shift Register that can be programmed to act as a SISO, SIPO, PISO or PIPO device, often on the fly.

...
Read more Read less

Filters

Viewing 1 - 20 of 673 products
Results per page
Description Price Package Type Logic Function Number of Stages Logic Family Mounting Type Counter Type Operation Mode Number of Elements Pin Count Minimum Operating Supply Voltage Maximum Operating Supply Voltage Dimensions Length Width
RS Stock No. 100-0763
Mfr. Part No.SN74HC595N
£0.353
Each (In a Tube of 25)
Units
PDIP Shift Register 8 HC Through Hole - Serial to Parallel 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 732-0691
Mfr. Part No.CD4017BEE4
£0.422
Each (In a Pack of 5)
Units
PDIP Counter, Divider 5 CMOS Through Hole Decade Up Counter 1 16 3 V 18 V 19.69 x 6.6 x 4.57mm 19.69mm 6.6mm
RS Stock No. 921-5166
Mfr. Part No.CD4017BEE4
£0.353
Each (In a Tube of 25)
Units
PDIP Counter, Divider 5 CMOS Through Hole Decade Up Counter 1 16 3 V 18 V 19.69 x 6.6 x 4.57mm 19.69mm 6.6mm
RS Stock No. 923-6706
Mfr. Part No.CD4060BEE4
£0.353
Each (In a Tube of 25)
Units
PDIP Counter, Divider 14 4000 Through Hole Binary Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 144-9934
Mfr. Part No.CD4026BE
£0.353
Each (In a Tube of 25)
Units
PDIP Counter, Divider 5 4000 Through Hole Decade Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 662-9590
Mfr. Part No.CD4026BE
£0.372
Each (In a Pack of 10)
Units
PDIP Counter, Divider 5 4000 Through Hole Decade Up Counter 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 170-7981
Mfr. Part No.74HCT595D,118
BrandNexperia
£0.203
Each (On a Reel of 2500)
Units
SO - 8 74HCT Surface Mount - Serial to Serial/Parallel 1 16 4.5 V 5.5 V 10 x 4 x 1.45mm 10mm 4mm
RS Stock No. 436-7767
Mfr. Part No.74HCT595D,112
BrandNexperia
£0.406
Each (In a Tube of 50)
Units
SOIC Shift Register 8 HCT Surface Mount - Serial to Serial/Parallel 1 16 4.5 V 5.5 V 10 x 4 x 1.45mm 10mm 4mm
RS Stock No. 144-9930
Mfr. Part No.CD4021BEE4
£0.21
Each (In a Tube of 25)
Units
PDIP Shift Register 8 4000 Through Hole - Serial/Parallel to Serial 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 662-9565
Mfr. Part No.CD4021BEE4
£0.612
Each (In a Pack of 5)
Units
PDIP Shift Register 8 4000 Through Hole - Serial/Parallel to Serial 1 16 3 V 18 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 709-2258
Mfr. Part No.CD74HCT393EE4
£0.499
Each (In a Pack of 10)
Units
PDIP Counter, Divider 4 HCT Through Hole Binary Up Counter 2 14 4.5 V 5.5 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 145-0195
Mfr. Part No.CD74HCT393EE4
£0.254
Each (In a Tube of 25)
Units
PDIP Counter, Divider 4 HCT Through Hole Binary Up Counter 2 14 4.5 V 5.5 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 304-863
Mfr. Part No.SN74LS393N
£2.01
Each
Units
PDIP Counter, Divider 4 LS Through Hole Binary Up Counter 2 14 4.75 V 5.25 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 144-9896
Mfr. Part No.SN74LS393N
£0.778
Each (In a Tube of 25)
Units
PDIP Counter, Divider 4 LS Through Hole Binary Up Counter 2 14 4.75 V 5.25 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 527-423
Mfr. Part No.SN74HC594N
£0.52
Each (In a Pack of 5)
Units
PDIP Shift Register 8 HC Through Hole - Serial to Serial/Parallel 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 121-8425
Mfr. Part No.SN74HC594N
£0.451
Each (In a Tube of 25)
Units
PDIP Shift Register 8 HC Through Hole - Serial to Serial/Parallel 1 16 2 V 6 V 19.3 x 6.35 x 4.57mm 19.3mm 6.35mm
RS Stock No. 483-7890
Mfr. Part No.HEF4017BT,652
BrandNexperia
£0.363
Each (In a Pack of 20)
Units
SOIC Counter, Divider 5 4000 Surface Mount Decade Up Counter 1 16 3 V 15 V 10 x 4 x 1.45mm 10mm 4mm
RS Stock No. 672-2850
Mfr. Part No.TC4017BP(N,F)
BrandToshiba
£0.472
Each (In a Pack of 5)
Units
PDIP Counter, Divider 5 4000 Through Hole Decade Up Counter 1 16 3 V 18 V 19.25 x 6.4 x 3.5mm 19.25mm 6.4mm
RS Stock No. 168-9619
Mfr. Part No.HEF4017BT,652
BrandNexperia
£0.323
Each (In a Tube of 50)
Units
SOIC Counter, Divider 5 4000 Surface Mount Decade Up Counter 1 16 3 V 15 V 10 x 4 x 1.45mm 10mm 4mm
RS Stock No. 436-7638
Mfr. Part No.74HC595D,112
BrandNexperia
£0.259
Each (In a Tube of 50)
Units
SOIC Shift Register 8 HC Surface Mount - Serial to Serial/Parallel 1 16 2 V 6 V 10 x 4 x 1.45mm 10mm 4mm
Related Products
Standard logic ICs using CMOS technology to achieve ...
Description:
Standard logic ICs using CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of CMOS integrated circuits. The 74HC4000 logic family is functionally and pin-compatible with the standard LS logic family, and all devices have the ability to drive 10 LSTTL loads. High-Speed CMOS Logic ...
Texas Instruments range of Counters and Shift Registers ...
Description:
Texas Instruments range of Counters and Shift Registers from the 74HC Family of CMOS Logic ICs. The 74HC Family use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family but with the low power consumption of standard CMOS integrated circuits. High-Speed CMOS Logic Operating Voltage: 2 ...
Advanced High-Speed CMOS, TTL logic Operating voltage: 4.5 ...
Description:
Advanced High-Speed CMOS, TTL logic Operating voltage: 4.5 to 5.5Compatibility: Input TTL, Output TTLESD protection exceeds JESD 22Latch-up performance exceeds 250 mA per JESD 17.
Standard logic ICs using CMOS technology to achieve ...
Description:
Standard logic ICs using CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of CMOS integrated circuits. The 74HC4000 logic family is functionally and pin-compatible with the standard LS logic family, and all devices have the ability to drive 10 LSTTL loads. High-Speed CMOS Logic ...