Hall Effect Sensor ICs

Filters

Viewing 481 - 483 of 483 products
Results per page
Description Price Magnetic Type Mounting Type Pin Count Minimum Magnetic Sensor Release Point Maximum Magnetic Sensor Operating Point Minimum Operating Supply Voltage Maximum Operating Supply Voltage Length Width Height Dimensions Minimum Operating Temperature Maximum Operating Temperature Package Type
RS Stock No. 196-1373
Mfr. Part No.SI7201-B-21-IV
£0.323
Each (In a Pack of 25)
Units
Latch Surface Mount 3 - - 1.71 V 5.5 V 2.75mm 1.6mm 1.15mm 2.75 x 1.6 x 1.15mm -40 °C +125 °C SOT-23
RS Stock No. 193-9559
Mfr. Part No.TLE4961-1K
BrandInfineon
£0.275
Each (On a Reel of 3000)
Units
- Surface Mount 3 0.6 mT 3.6 mT 3 V 32 V 3mm 1.6mm 1.1mm 3 x 1.6 x 1.1mm -40 °C +170 °C PG-SC59
RS Stock No. 196-1371
Mfr. Part No.SI7201-B-21-IV
£0.283
Each (On a Tape of 300)
Units
Latch Surface Mount 3 - - 1.71 V 5.5 V 2.75mm 1.6mm 1.15mm 2.75 x 1.6 x 1.15mm -40 °C +125 °C SOT-23
Related Products
The ATS468 is a true zero-speed gear tooth ...
Description:
The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package. The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. This small package can be easily assembled and used in ...
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect ...
Description:
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 ...
Allegro Current sensor ICs in CA and CB ...
Description:
Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments3000 Vrms galvanic isolation. 50A to 200A Integrated Current Sensor ICs, Allegro Micro Systems. Hall Effect Current Sensors, Allegro Micro Systems.
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.They include a voltage regulator, Hall-voltage generator, ...