ESD Grounding Cords

ESD grounding cords are used to safely connect elements together in an electrostatic discharge protected area (EPA). Grounding cords can be used to connect ESD grounding wrist straps and ESD safe mats to continuous monitors or earth bonding points, which are ground connections built into the workplace.


What are ESD grounding cords used for?


ESD grounding cords are used to protect workers and equipment in environments where sensitive electronic equipment is used, manufactured, assembled or repaired. Along with other ESD-safe products, grounding cords can be used to prevent electric sparks that could ignite flammable liquids, gases and explosives.


Types of ESD grounding cords


ESD grounding cords can be straight or coiled, in varying lengths, with different connection/plug types such as press studs, ring terminals, spade terminals, banana plugs or crocodile clips.


Resistance of cords is measured in ohms and the resistance required will vary depending on where in the ground loop the cord is located. However, some are simply connecting cords with no resistor.


...
Read more Read less

Filters

Viewing 1 - 18 of 18 products
Results per page
Description Price Cord Type Termination Type Stud Size Cord Length Cord Style Lead Resistance Colour Complies with EN 61340-5-1
RS Stock No. 273-6717
BrandRS PRO
£10.10
Each
Units
Connecting Press Stud - Press Stud 10mm 1.8m Coiled 1MΩ Yellow Yes
RS Stock No. 129-4874
BrandRS PRO
£11.72
Each
Units
Connecting Press Stud - Press Stud 10mm 2m Straight 1MΩ Yellow Yes
RS Stock No. 798-9335
BrandRS PRO
£14.10
Each
Units
Low Profile Press Stud - Ring 10mm 4.5m Straight 1MΩ Black Yes
RS Stock No. 552-898
BrandRS PRO
£10.36
Each
Units
Connecting Press Stud - Banana Plug/Croc Clip 10mm 1.8m Coiled 2MΩ Yellow Yes
RS Stock No. 129-4969
BrandRS PRO
£12.08
Each
Units
Connecting Press Stud - Press Stud 10mm 1m Straight 1MΩ Yellow Yes
RS Stock No. 287-7391
BrandRS PRO
£10.36
Each
Units
Connecting Press Stud - Banana Plug/Croc Clip 10mm 3.6m Coiled 2MΩ Yellow Yes
RS Stock No. 552-905
BrandRS PRO
£11.27
Each
Units
Connecting Press Stud - Press Stud 10mm 1.8m Coiled 4MΩ Yellow Yes
RS Stock No. 291-9489
BrandRS PRO
£9.92
Each
Units
Connecting Press Stud - Press Stud 10mm 1.8m Coiled 2MΩ Yellow Yes
RS Stock No. 123-5613
BrandRS PRO
£8.31
Each
Units
Connecting Press Stud - Ring 5mm 1m Straight Black Yes
RS Stock No. 273-6701
BrandRS PRO
£10.59
Each
Units
Connecting Press Stud - Banana Plug/Croc Clip 10mm 1.8m Coiled 1MΩ Yellow Yes
RS Stock No. 129-4975
BrandRS PRO
£7.54
Each
Units
Connecting Press Stud - Press Stud 10mm 0.115m Straight Yellow Yes
RS Stock No. 287-7470
BrandRS PRO
£7.31
Each
Units
Connecting Press Stud - Press Stud 10mm 0.18m Straight 1MΩ Yellow Yes
RS Stock No. 838-1253
Mfr. Part No.FGC151M
BrandSCS
£12.24
Each
Units
Low Profile 10 mm Stud - Ring Terminal 10mm 4.6m Straight 1MΩ Black Yes
RS Stock No. 838-1316
Mfr. Part No.3048
BrandSCS
£23.72
Each
Units
Standard 10 mm Stud - Ring Terminal 10mm 4.6m Straight 1MΩ Black Yes
RS Stock No. 838-0767
Mfr. Part No.2389
BrandSCS
£26.60
Each
Units
Standard 10 mm Stud x 2 10mm 3m Straight Black Yes
RS Stock No. 838-1313
Mfr. Part No.3042
BrandSCS
£26.34
Each
Units
Standard Banana Plug - 3.05m Straight Black Yes
RS Stock No. 2508949789
Mfr. Part No.14234
BrandDesco
£23.77
Each
Units
- - - - - - - -
RS Stock No. 2508946572
Mfr. Part No.91095
BrandDesco
£17.61
Each
Units
- - - - - - - -
Related Products
RS Pro Earth Bonding Plug, EBP, is designed ...
Description:
RS Pro Earth Bonding Plug, EBP, is designed to provide a common ground point using a protective earth in ESD protected areas. The plug fits into the mains supply socket making a connection with the earth conductor only. The live and neutral pins are moulded plastic allowing positive location within ...
The SCS ESD grounding cord is the 2220 ...
Description:
The SCS ESD grounding cord is the 2220 series, wrist strap which is used with single-wire wrist straps. This cord is of black colour, highly durable with segmented strain relief and a single bundle of tinsel conductors laced for great strength and reinforced with strong synthetic fibres. It has 4mm ...
The SCS ESD grounding cord is a 15ft ...
Description:
The SCS ESD grounding cord is a 15ft 20AWG PVC wire. It has moulded-in male snap fastener with integral 1Mohm resistor on one end and solderless terminal on other. It comes in black nylon cover with black polyester insert and has a #10 ring terminal. Connects all static control mats ...
Our own brand of RS Pro ESD wrist-straps ...
Description:
Our own brand of RS Pro ESD wrist-straps feature premium grade fabric band with an elastic ratio of 1:2.5” to 1:3. The outer surface of the wristband is non-conductive and the inside surface of the strap is conductive lined with 5 rows of double-ply silver yarn. The wristband also contains ...