Motor Control Development Kits

Filters

Viewing 1 - 2 of 2 products
Results per page
Description Price Kit Name Kit Classification For Use With Featured Device
New
RS Stock No. 204-7632
Mfr. Part No.RTK0EMX270S01020BJ
£425.00
Each
Units
Evaluation System for Stepping Motor with Resolver Evaluation Kit Renesas Motor Workbench R5F524TEADFP
New
RS Stock No. 198-1194
Mfr. Part No.DM330022-1
£135.96
Each
Units
dsPICDEM MCSM Development Board - For high-performance stepper motor control applications where control of the full-bridge inverter is required 4-channel, a programmable ADC trigger, high-speed PWM with Complementary mode output
Related Products
The ON Semiconductor BDK-DCDC-GEVB evaluation board is an ...
Description:
The ON Semiconductor BDK-DCDC-GEVB evaluation board is an adapter board needed to power higher power daughter cards or shields attached to the Bluetooth IoT Development Kit (B-IDK). This plug into the B-IDK baseboard, BDK-GEVK and provides power to higher power shields. It is a Pb free evaluation board. • Dual ...
12-bit resolution± 1 LSB max DNL± 1 LSB ...
Description:
12-bit resolution± 1 LSB max DNL± 1 LSB max INL (MCP3204/3208-B± 2 LSB max INL (MCP3204/3208-C4 (MCP3204) or 8 (MCP3208) input channelsanalogue inputs programmable as single-ended or pseudo-differential pairs On-chip sample and hold SPI serial interface (modes 0,0 and 1,1Single supply operation: 2.7V – 5.5V100 ksps max. sampling rate at ...
The STEVAL-IPFC12V1 2 kW interleaved PFC reference design ...
Description:
The STEVAL-IPFC12V1 2 kW interleaved PFC reference design features the performance of analog cycle-by-cycle current regulation and the flexibility of digital control to generate sinusoidal supplies with very high power factor and very low harmonic distortion.Digital power control is based on the STNRGPF12 digital PFC controller, which in combination with ...
Controls both unipolar and bipolar stepper motors in ...
Description:
Controls both unipolar and bipolar stepper motors in open-loop or close-loop (current control) mode No hardware changes are necessary for 8-, 6- or 4-wire stepper motors in either bipolar or unipolar configurations Software to run motors in open-loop or closed-loop with full or variable micro-stepping GUI for controlling step commands, ...