Pneumatic Straight Tube-to-Tube Adaptors

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic straight tube to tube adaptors being one example.

What are pneumatic straight tube to tube adaptors used for?

Pneumatic straight tube-to-tube adaptors are used to connect two tubes together. Straight adapters do not change the tube direction and most work with a range of materials such as nylon, polyurethane and polyamide.

Types of pneumatic straight tube to tube adaptors

Pneumatic straight tube-to-tube adaptors come in a variety of diameters, sizes, and materials. Some are nickel-plated brass and others feature glass-filled nylon.


...
Read more Read less

Filters

Viewing 1 - 20 of 438 products
Results per page
Description Price Manufacturer Series Tube Connection A Tube Connection B Body Material Finish Maximum Operating Pressure Minimum Operating Temperature Chemical Resistant Food Grade Tube Connection B - Type Tube Connection A - Tube Size Tube Connection A - Type Tube Connection B - Tube Size Maximum Operating Temperature
RS Stock No. 916-0873
BrandRS PRO
£0.989
Each (In a Pack of 10)
Units
- Push In 6 mm Push In 6 mm Polyoxymethylene Nickel Plated 10 bar 0°C - - Push In 6mm Push In 6mm +60°C
RS Stock No. 916-0877
BrandRS PRO
£10.68
1 Pack of 10
Pack(s)
- Push In 8 mm Push In 8 mm Polyoxymethylene Nickel Plated 10 bar 0°C - - Push In 8mm Push In 8mm +60°C
RS Stock No. 916-0870
BrandRS PRO
£9.42
1 Pack of 10
Pack(s)
- Push In 4 mm Push In 4 mm Polyoxymethylene Nickel Plated 10 bar 0°C - - Push In 4mm Push In 4mm +60°C
RS Stock No. 916-0886
BrandRS PRO
£1.316
Each (In a Pack of 10)
Units
- Push In 10 mm Push In 10 mm Polyoxymethylene Nickel Plated 10 bar 0°C - - Push In 10mm Push In 10mm +60°C
RS Stock No. 176-1326
BrandRS PRO
£1.498
Each (In a Pack of 10)
Units
- Push In 6 mm Push In 6 mm - - 20 bar -20°C - - Push In 6mm Push In 6mm +80°C
RS Stock No. 176-2240
BrandRS PRO
£1.839
Each (In a Pack of 10)
Units
- Push In 4 mm Push In 4 mm Brass Nickel Plated - - - - Push In 4mm Push In 4mm -
RS Stock No. 197-7714
BrandRS PRO
£74.68
1 Bag of 10
Bag(s)
57000 - - Nickel Plated Brass - 20bar -20°C - - - - - - +80°C
RS Stock No. 144-2628
BrandRS PRO
£12.52
1 Bag of 10
Bag(s)
- Push In 4 mm Push In 6 mm Plastic - 9.9 kgf/cm², 990 kPa 0°C - - Push In 4mm Push In 6mm +60°C
RS Stock No. 176-1327
BrandRS PRO
£1.608
Each (In a Pack of 10)
Units
- Push In 8 mm Push In 8 mm - - 20 bar -20°C - - Push In 8mm Push In 8mm +80°C
RS Stock No. 176-2241
BrandRS PRO
£1.689
Each (In a Pack of 10)
Units
- Push In 6 mm Push In 6 mm Brass Nickel Plated - - - - Push In 6mm Push In 6mm -
RS Stock No. 144-2629
BrandRS PRO
£13.52
1 Bag of 10
Bag(s)
- Push In 6 mm Push In 8 mm Plastic - 9.9 kgf/cm², 990 kPa 0°C - - Push In 6mm Push In 8mm +60°C
RS Stock No. 176-1328
BrandRS PRO
£2.291
Each (In a Pack of 10)
Units
- Push In 6 mm Push In 4 mm - - 20 bar -20°C - - Push In 6mm Push In 4mm +80°C
RS Stock No. 176-1331
BrandRS PRO
£2.753
Each (In a Pack of 10)
Units
- Push In 8 mm Push In 4 mm - - 20 bar -20°C - - Push In 8mm Push In 4mm +80°C
RS Stock No. 144-2643
BrandRS PRO
£6.48
1 Bag of 10
Bag(s)
- Push In 4 mm Push In 6 mm Plastic - 9.9 kgf/cm², 990 kPa 0°C - - Push In 4mm Push In 6mm +60°C
RS Stock No. 176-2242
BrandRS PRO
£1.979
Each (In a Pack of 10)
Units
- Push In 8 mm Push In 8 mm Brass Nickel Plated - - - - Push In 8mm Push In 8mm -
RS Stock No. 176-1394
BrandRS PRO
£1.442
Each (In a Pack of 10)
Units
- Push In 8 mm Push In 6 mm - - 20 bar -20°C - - Push In 8mm Push In 6mm +80°C
RS Stock No. 176-1409
BrandRS PRO
£3.184
Each (In a Pack of 10)
Units
- Push In 6 mm Push In 6 mm - - 20 bar -20°C - - Push In 6mm Push In 6mm +80°C
RS Stock No. 176-2164
BrandRS PRO
£23.297
Each (In a Pack of 10)
Units
- Push In 10 mm Push In 10 mm Stainless Steel - 20 bar -15°C Yes Yes Push In 10mm Push In 10mm +200°C
RS Stock No. 144-2630
BrandRS PRO
£16.81
1 Bag of 10
Bag(s)
- Push In 8 mm Push In 10 mm Plastic - 9.9 kgf/cm², 990 kPa 0°C - - Push In 8mm Push In 10mm +60°C
RS Stock No. 176-1329
BrandRS PRO
£2.665
Each (In a Pack of 10)
Units
- Push In 8 mm Push In 6 mm - - 20 bar -20°C - - Push In 8mm Push In 6mm +80°C
Related Products
KQ2 series reducer nipple from SMC, made from ...
Description:
KQ2 series reducer nipple from SMC, made from white plastic and available in various sizes. Maximum operating pressure 10 bar Maximum vacuum operating pressure -100k PaProof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C). Reducer Nipple KQ2N. Tube-to-Tube Fittings & Plugs.
The NPQH-D range offers a convenient push-in fitting ...
Description:
The NPQH-D range offers a convenient push-in fitting system with over 1000+ types of standard and function fittings. Reliable pneumatic fittings offer you several benefits which are outlined below. · Effortless, quick and simple push-pull principle installation· Robust, solid nickel-plated brass with high corrosion resistance (CRC3) as well as chemical ...
LIQUIfit and LIQUIfit, 2 new “eco-designed” ranges of ...
Description:
LIQUIfit and LIQUIfit, 2 new “eco-designed” ranges of leak-free and compact push-in fittings, tubing and complementary products for liquid transfer applications. The LIQUIfit range is suitable for liquid transfer applications. This product range also benefits from a range extension of metal adaptors designed for liquid transfer applications. LIQUIfit provides zero ...
• One-Touch push to connect configuration allows for ...
Description:
• One-Touch push to connect configuration allows for an instant tubing connection• Useful for piping in confined space, due to its six-angle wrench processing inside• Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube from fitting• Fittings are already equipped with Teflon treatment or ...