Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow fittings being one example.

What are pneumatic elbow fittings used for?

Pneumatic elbow fittings are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow fittings

Pneumatic elbow fittings come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 81 - 100 of 882 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Angle Body Material Connector B - Gender Thread Material Manufacturer Series Swivel Connection Mounting Type Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 144-2611
BrandRS PRO
£8.71
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 6 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-0963
BrandRS PRO
£2.525
Each (In a Pack of 10)
Units
Threaded-to-Tube G 1/8 Push In 8 mm Male 90° Brass - Brass - Yes - - - -
RS Stock No. 144-2614
BrandRS PRO
£12.48
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 8 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-1345
BrandRS PRO
£1.891
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/8 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1349
BrandRS PRO
£2.159
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/8 Push In 8 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1343
BrandRS PRO
£1.987
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/4 Push In 4 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-2218
BrandRS PRO
£48.425
Each (In a Pack of 10)
Units
Threaded G 3/8 G 3/8 Male 90° Stainless Steel Female - - No - 140 bar +300°C -110°C
New
RS Stock No. 187-5701
BrandRS PRO
£23.70
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
New
RS Stock No. 187-5703
BrandRS PRO
£31.10
1 Bag of 10
Bag(s)
Threaded-to-Tube - - - - Brass Male Nickel Plated Brass 55000 - - 20 bar +80°C -20°C
RS Stock No. 176-0957
BrandRS PRO
£0.66
Each (In a Pack of 10)
Units
Threaded-to-Tube R 3/8 Push In 8 mm Male 90° Brass - Brass - No - - - -
RS Stock No. 176-0966
BrandRS PRO
£5.577
Each (In a Pack of 10)
Units
Threaded-to-Tube G 1/8 Push In 4 mm Male 90° Brass - Brass - Yes - - - -
RS Stock No. 144-2617
BrandRS PRO
£21.92
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/4 Push In 10 mm Male - Plastic - Brass - No - 9.9 kgf/cm², 990 kPa +60°C 0°C
RS Stock No. 176-2172
BrandRS PRO
£19.455
Each (In a Pack of 10)
Units
Tube-to-Tube Push In 6 mm Push In 6 mm - 90° Stainless Steel - - - No - 20 bar +200°C -15°C
RS Stock No. 176-1354
BrandRS PRO
£2.299
Each (In a Pack of 10)
Units
Tube-to-Tube Push In 8 mm Push In 8 mm - 90° - - - - No - 20 bar +80°C -20°C
RS Stock No. 176-2177
BrandRS PRO
£17.336
Each (In a Pack of 10)
Units
Tube-to-Tube Push In 8 mm Push In 8 mm - - Stainless Steel - - - No - 20 bar +200°C -15°C
RS Stock No. 176-1415
BrandRS PRO
£2.282
Each (In a Pack of 10)
Units
Threaded-to-Tube M5 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1815
BrandRS PRO
£4.319
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/4 Push In 12 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1804
BrandRS PRO
£2.815
Each (In a Pack of 10)
Units
Threaded-to-Tube R 1/4 Push In 10 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1336
BrandRS PRO
£2.621
Each (In a Pack of 10)
Units
Threaded-to-Tube R 3/8 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
RS Stock No. 176-1348
BrandRS PRO
£2.643
Each (In a Pack of 10)
Units
Threaded-to-Tube R 3/8 Push In 6 mm Male 90° - - Brass - Yes - 20 bar +80°C -20°C
Related Products
Fully made of stainless steel AISI 316L. It ...
Description:
Fully made of stainless steel AISI 316L. It has been developed to drive corrosive fluids or to be used in aggressive environments. It is ideal for direct contact with food fluids. This line can be used also in salty environment and on machines that need frequent washing with aggressive detergents. ...
RS Pro push-in fittings made of nickel plated ...
Description:
RS Pro push-in fittings made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal short)& Metric- Metal Robustness- Wide Range- Silicon FreeApplications:- neumatic Automation- ...
KQ2 one-touch, metric and inch size fittings are ...
Description:
KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a ...
RS Pro DN5 quick connect couplings with MIGNON ...
Description:
RS Pro DN5 quick connect couplings with MIGNON profile. Interchangeable with RECTUS/LEGRIS, PARKER 21/90, CAMOZZI 5050 - 5150, CEJN 220 and FESTO KD - KS 3- Working Pressure: 0 bar to 12 bar (1.2 MPa)- Working Temperature: - 20 °C to + 80 °C- Fluid: Compressed air.