Pneumatic Bulkhead Tube-to-Tube Adaptors

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry, as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems contain many components, pneumatic bulkhead tube-to-tube adaptors being one example. Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

What are pneumatic bulkhead tube-to-tube adaptors used for?

Pneumatic bulkhead tube-to-tube adaptors connect tubes through a panel (the bulkhead). They are designed to provide a reliable seal on both sides with no loss of air. Pneumatic bulkhead tube-to-tube adaptors work well with nylon and polyurethane tubes.

Types of pneumatic bulkhead tube-to-tube adaptors

Pneumatic bulkhead tube-to-tube adaptors come in a variety of diameter, thread size, grade and material. The adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 1 - 20 of 108 products
Results per page
Description Price Manufacturer Series Type Tube Connection A Tube Connection B Body Material Mounting Hole Diameter Thread Material Finish Chemical Resistant Food Grade Maximum Operating Pressure Tube Connection B - Tube Size Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 916-0823
BrandRS PRO
£2.149
Each (In a Pack of 10)
Units
- Straight Push In 6 mm Push In 6 mm Nickel Plated Brass 15mm - Nickel Plated - - 10 bar 6mm +60°C 0°C
RS Stock No. 916-0827
BrandRS PRO
£2.632
Each (In a Pack of 10)
Units
- Straight Push In 8 mm Push In 8 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 8mm +60°C 0°C
RS Stock No. 916-0820
BrandRS PRO
£2.018
Each (In a Pack of 10)
Units
- Straight Push In 4 mm Push In 4 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 4mm +60°C 0°C
RS Stock No. 916-0836
BrandRS PRO
£4.61
Each (In a Pack of 10)
Units
- Straight Push In 10 mm Push In 10 mm Nickel Plated Brass - - Nickel Plated - - 10 bar 10mm +60°C 0°C
RS Stock No. 176-1297
BrandRS PRO
£3.275
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 6 mm Push In 6 mm Brass - Brass Nickel Plated - - 20 bar 6mm +80°C -20°C
RS Stock No. 176-1298
BrandRS PRO
£3.655
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 8 mm Push In 8 mm Brass - Brass Nickel Plated - - 20 bar 8mm +80°C -20°C
RS Stock No. 176-2246
BrandRS PRO
£3.286
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 8 mm Push In 6 mm Brass - Brass Nickel Plated - - - 6mm +80°C -20°C
RS Stock No. 176-2244
BrandRS PRO
£2.759
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 4 mm - Brass - Brass Nickel Plated - - - 2.7mm +80°C -20°C
RS Stock No. 176-1776
BrandRS PRO
£6.572
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 12 mm Push In 12 mm Brass - Brass Nickel Plated - - 20 bar 12mm +80°C -20°C
RS Stock No. 144-2632
BrandRS PRO
£57.02
1 Bag of 10
Bag(s)
- Bulkhead Union Push In 12 mm Push In 12 mm - - Brass Nickel Plated - - 9.9 kgf/cm², 990 kPa 12mm +60°C 0°C
RS Stock No. 176-1296
BrandRS PRO
£2.96
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 4 mm Push In 4 mm Brass - Brass Nickel Plated - - 20 bar 4mm +80°C -20°C
RS Stock No. 176-2247
BrandRS PRO
£3.725
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 10 mm Push In 8 mm Brass - Brass Nickel Plated - - 20 bar 8mm +80°C -20°C
RS Stock No. 176-2245
BrandRS PRO
£2.847
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 6 mm Push In 4 mm Brass - Brass Nickel Plated - - - 4mm +80°C -20°C
RS Stock No. 176-1775
BrandRS PRO
£5.357
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 10 mm Push In 10 mm Brass - Brass Nickel Plated - - 20 bar 10mm +80°C -20°C
RS Stock No. 176-1777
BrandRS PRO
£8.426
Each (In a Pack of 10)
Units
- Bulkhead Connector Push In 14 mm Push In 14 mm Brass - Brass Nickel Plated - - 20 bar 14mm +80°C -20°C
RS Stock No. 327-2343
Mfr. Part No.3116 06 00
BrandLegris
£4.092
Each (In a Pack of 5)
Units
3116 Straight Push In 6 mm Push In 6 mm - - - Nickel Plated - - 20 bar 6mm +80°C -20°C
RS Stock No. 771-4936
Mfr. Part No.KQ2E06-00A
BrandSMC
£4.442
Each (In a Pack of 5)
Units
KQ2 Straight Push In 6 mm Push In 6 mm - 15mm - - - - - 6mm +60°C -5°C
RS Stock No. 218-1527
Mfr. Part No.KCE06-00
BrandSMC
£11.22
Each
Units
KC Straight Push In 6 mm Push In 6 mm - 15mm - Nickel Plated - - 1 MPa 6mm +60°C -5°C
RS Stock No. 327-2365
Mfr. Part No.3116 08 00
BrandLegris
£4.734
Each (In a Pack of 5)
Units
3116 Straight Push In 8 mm Push In 8 mm - - - Nickel Plated - - 20 bar 8mm +80°C -20°C
RS Stock No. 771-4949
Mfr. Part No.KQ2E08-00A
BrandSMC
£5.358
Each (In a Pack of 5)
Units
KQ2 Straight Push In 8 mm Push In 8 mm - 17mm - - - - - 8mm +60°C -5°C
Related Products
RS Pro male adaptors made of nickel plated ...
Description:
RS Pro male adaptors made of nickel plated brass ensure highest quality,reliability and endurance in the pneumatic field. Main advantages:- Quick connection and disconnection- Full Flow and Vacuum resistant tank to special shaped seals- 3 threads available, BSPP, BSPT (universal short)& Metric- Metal Robustness- Wide Range- Silicon Free Applications:- Pneumatic ...
Can be used in pneumatic piping and in ...
Description:
Can be used in pneumatic piping and in a wide range of applications. • One-touch push to connect configuration allows for an instant tubing connection• All models are useful for piping in confined spaces due to its six-angle wrench• Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve ...
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing selected. Tube to tube threaded connector.
The Quick Star QSMS range offer a convenient ...
Description:
The Quick Star QSMS range offer a convenient push-in fitting system for compressed air and water with over 1000+ types of standard and function fittings. These high quality, bulkhead tube to tube connectors offer a variety of Metric, G parallel or R tapered threads and diameters to suit each and ...