Fixed Hydraulic Cylinders

Fixed hydraulic cylinders, or rams, are mechanical actuators that allow hydraulic systems to apply linear motion and force. They transfer the pressure from hydraulic fluid through a piston to the point of operation. Fixed cylinders operate without mechanical gears or levers, and are fixed components of machinery. Portable cylinders, by comparison, are moveable versions for many one-off applications (classified as liftingor pullingtypes).

What are fixed hydraulic cylinders used for?

Fixed hydraulic cylinders have evolved into a vast array of configurations, sizes and special designs. Cylinders are used in both industrial applications (including hydraulic presses, cranes, forges, compactors and packing machines) and mobile applications (agricultural machines, construction equipment, marine equipment, etc.). The mobile machinery industry relies nearly exclusively on hydraulic cylinders for linear motion.

Types of fixed hydraulic cylinders

The three most popular types of construction are tie-rod, welded rod and telescopic. All of these can be either single or double acting. Each type uses a different methodology depending on how the end caps are attached to the cylinder barrel, as well as internal nuances. Fixed hydraulic cylinders are also available in an array of scales to suit various applications.


...
Read more Read less

Filters

Viewing 1 - 8 of 8 products
Results per page
Description Price Manufacturer Series Bore Stroke Length Closed Length Extended Length Pull Force Flow Rate Out Flow Rate In Maximum Operating Pressure Weight
RS Stock No. 263-8714
Mfr. Part No.R987155269
£441.06
Each
Units
1X 50mm 400mm 618mm 1018mm 21.55kN 11.8L/min 8.1L/min 160 bar 1.2kg
RS Stock No. 263-8540
Mfr. Part No.UK00827416
£307.02
Each
Units
1X 32mm 50mm 243mm 293mm 8.79kN 4.8L/min 3.3L/min 160 bar 550g
RS Stock No. 263-8657
Mfr. Part No.R987155264
£353.08
Each
Units
1X 40mm 300mm 490mm 790mm 14.02kN 7.5L/min 5.3L/min 160 bar 850g
RS Stock No. 263-8613
Mfr. Part No.R987155261
£300.61
Each
Units
1X 40mm 100mm 290mm 390mm 14.02kN 7.5L/min 5.3L/min 160 bar 850g
RS Stock No. 263-8556
Mfr. Part No.2952993400
£273.80
Each
Units
1X 32mm 100mm 293mm 393mm 8.79kN 4.8L/min 3.3L/min 160 bar 550g
RS Stock No. 263-8629
Mfr. Part No.R987155262
£307.85
Each
Units
1X 40mm 150mm 340mm 490mm 14.02kN 7.5L/min 5.3L/min 160 bar 850g
RS Stock No. 2550347037
Mfr. Part No.CHDKGB20-50M
BrandSMC
£117.12
Each
Units
- - - - - - - - - -
RS Stock No. 2550347050
Mfr. Part No.CHDKGB63-20M
BrandSMC
£287.47
Each
Units
- - - - - - - - - -
Related Products
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements exist Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse range of industries including, mining, power stations, railways shipyards ...
Use where collapsed height is a premier requirement ...
Description:
Use where collapsed height is a premier requirement in a lifting, levelling or pushing application Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity.
Combine minimum collapsed height with optimum stroke They ...
Description:
Combine minimum collapsed height with optimum stroke They provide a short adjusting and lifting force in confined work areas Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension.
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed reducing operator fatigue. The cylinders feature a plunger wiper and ...